SOURCE: torque settings for cylinder head nissan sentra
Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees
SOURCE: cylinder head torque settings for a toyota 1493cc
If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.
SOURCE: main bearings and big end bearings tension specs
This site has all the torque specs you should need make sure this is the correct engine.
http://www.davidfarmerstuff.com/C6Z06-Torque.pdf
100 views
Usually answered in minutes!
×