SOURCE: jeep codes location of unit
Got me a complete manual for 199 jeep factory model and found location of each individual unit in question. Manual gives u possible solution to each code and repair and or replace. As a mechanic myself testing, trouble shooting and repair was not that difficult. Shift solenoid was very difficult to get to. Located under the head lamp passenger side.
SOURCE: Locationof the Torque Converter Clutch Solenoid
Your transmission should still work if the solenoid goes bad. It will just shift funny
SOURCE: torque converter clutch solenoid stuck
Unless you live in a state that requires an emissions test, forget it. The factory fix is to replaced the converter and internal seals and bushings. These states machines will not let you run a test with the light on.
SOURCE: 2000 pontiac montana torque converter clutch
It is one drivers side on the back of the transmission
SOURCE: Where is the Torque Converter clutch solenoid
Actually, the Torque Converter Clutch Solenoid is located within the transmission housing that is easily accessible through the transmission oil pan. The TCC solenoid may vary in location dependent upon manufacture but generally it is located as aforementioned. It can cause your vehicle to stall if stuck open or close because it controls loads to the engine via your torque converter which is located between the vehicle's engine and transmission. Also, make certain that you attempt to change the transmission fluid and filter before changing the TCC solenoid because that may be your underlying issue. If not, simply reuse your fresh oil and change the TCC soleniod.
952 views
Usually answered in minutes!
×