How to install an AC bypass pulley assembly on 1999 Chrysler Town and Country

SOURCE: how to replace our low beam headlight on 1999 town and country

1.) Open the hood of your van 2.) On the passenger side of the vehicle, look behind the headlight enclosure. You will see a set of wires running into the back of it. This is the power clip. Either with your hand or a flat-head screwdriver, pop the power clip off.
3.) There is a plastic ring encasing the light bulb. Turn the ring counter-clockwise and pull it out of the socket and set it aside.
4.) Pull firmly on the light bulb to remove it.
5.) Place the new light bulb into the same opening. Be careful not to touch the glass part of the new bulb. The oils in your skin can substantially reduce the life of the new bulb.
6.) Replace the plastic ring and turn it clockwise to lock it in place.
7.) Reattach the power clip to the back of the bulb.

Greg Bernett

• 2993 Answers
• Posted on Nov 13, 2009

SOURCE: Front PCV Valve on chrysler town and country

PCV valve location-2.4L engine


PCV valve location-3.3L and 3.8L engines

SOURCE: What size belt do you need to bypass the a/c

You have to purchase an air conditioner compressor delete kit. Any belt you try to put on will not work duse to the routing. The kit comes with a bracket an idler pulley and a new belt with all nessessary hardware to install they run about $100.00

Marvin

• 85242 Answers
• Posted on Jun 29, 2012

SOURCE: where is the oil sending unit located on a 1999 chrysler town and country 3.3l lx model

Great!

SOURCE: fuel filter on a 1999 chrysler town and country

I belive the filter is in the fuel tank, its an integeral part of the pump/pickup assembly