Cars & Trucks Logo

Related Topics:

What is a good but economical obd reader for a f350 diesel super duty

5 Related Answers

Anonymous

  • 426 Answers
  • Posted on Oct 19, 2008

SOURCE: hard starts even on cold mornings.

Need to check that glow plugs are working to spec and getting good power source

Ad

Anonymous

  • 3 Answers
  • Posted on Dec 05, 2008

SOURCE: Ford F350 Super Duty Diesel automatic Transmission

possible rear break shoe springs broke

Anonymous

  • 2 Answers
  • Posted on Jun 05, 2009

SOURCE: ac relay location in fuse box

you have to refer to the owner's manual. that is where they list the fuse/relay locations. if not there, you may need to refer to the diesel supplement book. but i think it will be in the owners manual. i have a 2002 f250 and that's where mine are.

Anonymous

  • 93 Answers
  • Posted on Jun 06, 2009

SOURCE: Shut 05 Ford f350 diesel off wont start

dies the truck restart once it cools off? it is very common for th 6.0 to have high pressure oil issues on a hot soak. they will run till the cows come home but once shut off they can not build up enough pressure by cranking speed alone to start truck until it cools down and the seals become rigid enough to bridge the gaps they are sealing in the first please. if this is the case. it may be the STC fitting ojn the back of the high pressure oil pump (intake and turbos must be removed to check) or possibly the branch tube o rings have worn. the branch tubes are located under the valve covers and supply the fuel injectors the oil they need to perform their "power stroke"...

richie9911

Richard M.

  • 155 Answers
  • Posted on Nov 14, 2012

SOURCE: 2005 6.0 liter ford Diesel glow plugs how do you replace

Just below each valve cover you will find a wire harness that has 4 plugs on it. Remove each plug(becareful they get brittle over time). down in each well you will see the glow plug. there is a hex on the glow plugs. unscrew the old plugs and replace. Good Luck

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2001 F350 v10 super duty, It won't go into second

first, i also like FORD f350, and there is the info of the DTC
P1000 - Ford Type Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled Description OBD II Monitor Testing Not Complete Conditions
Cause Key on or engine running, this code is set when a PCM Reset is performed and then one or more of the OBD II Main Monitors have not been completed It should be cleared from the PCM to pass an I/M Test for registration
or you can ask the 24 hrs live technical support obd2 multidiag actia, they will like to help you, good luck
0helpful
1answer

Where is the turn signal relay for 2002 f350 2wd diesel at

HI there:


On 2002 Ford Truck F350 Super Duty P/U 4WD 7.3L Turbo Diesel 8cyl the Flasher is located: front seating area, driver side, under dash, mounted in fuse panel.


Hope helps.
0helpful
1answer

Hypertech programmer tells me i have theese 3 code have reset them come back on.checked for codes with a odb2 scanner showed no codes on it.

Hello and welcome to FixYa!

If the obd reader is not updated, that's the reason why it doesn't show codes. As a first course of action, I strongly suggest that you update the obd II scanner then go for the procedure. This can help.

If the codes won't disappear, then the parts concerned will surely need replacement to resolve the issue.

Hope this helps and thank you for using FixYa! Have a good one!
0helpful
1answer

2002 Ford F350 Super Duty diesel engine...what size is it?

Ford makes two diesels, the 7.3L and the 6.0L. The 6.0L were marked on the decal on the front fenders with the words Power diesel in fornt of it. If yours isn't marked this way , the only way to identify this beast is under the hood on the Vacuum decal.
29helpful
3answers

Ford f350 diesel truck 30 amp fuse keeps blowing.

It is the fuel heater, All you have to do is unplug it.a4c0d50.gif
1helpful
1answer

Ac relay location in fuse box

you have to refer to the owner's manual. that is where they list the fuse/relay locations. if not there, you may need to refer to the diesel supplement book. but i think it will be in the owners manual. i have a 2002 f250 and that's where mine are.
0helpful
1answer

2006 f350 wont start if warm

It is Vapor Locking at the Pump. The O rings are Swelling too much and will not allow the fuel to leave the Pump or enter the Injectors.
Ford knows of this Problem. Call a Local Mechanic He will have to Fix the Problem
0helpful
2answers

F350 Super Duty Diesel 2005 suddenly died while driving.Cranks fine but wont start.Help

that's good but it still doesn't rule out a leak in the high pressure oil system. When you turn on the key do the injectors buzz like normal? Usually 5-10 secs
0helpful
1answer
1helpful
1answer

Hard starts even on cold mornings.

Need to check that glow plugs are working to spec and getting good power source
Not finding what you are looking for?

240 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...