On my 2000 nissan quest gxe, the steering wheel cannot unlock and wont start? what is my problem?

Inside, outside, what is wrong with it?

This link should tell you everything you need:

1993 Nissan Quest GXE V6 3 0 Steering Gear Linkage Diagram

do you have enough ****** fluid it sounds like an overdrive problem.

pressure should be 40 psi. change pump in tank if bad.

go here for help

http://groups.yahoo.com/group/villagerquest/

if your key is a transonder key wich has chip in it give it a couple of minutes to reset the code keep key in ignition and wait to see if it reads key or try another key and see if you have sameproblem make sure you unlock steering wheel disconnecting batteryfor posts might have reset car computer and cannot read ur key...

you will find it when you lift up the bonnet ,say it is in front of the steering wheel,you will notice it by a reservoir of oil,

i solved it by finding someone that gave it to me for free

try turning the wheel back and forth while wiggling the key if that doesn't work i need more info.

you take the plastic off around the colume off lower the steering wheel (4bolts)underside ing switch on top a rod goes to it from key switch steering wheel stays on

You may have bad motor mounts. I would check this 1st.