2000 Ford Taurus Logo

Related Topics:

Dale Wallace Posted on Nov 13, 2016

I have a ford taurus 2000 my engine blew up i replaced the 2000 engine with a 3.0 vulcan what else must i modify so the car will start

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Oct 25, 2008

SOURCE: 2000 ford taurus dumping coolant

It sounds to me like you have a freeze plug that is leaking badly.

Ad

Anonymous

  • 1 Answer
  • Posted on Feb 25, 2009

SOURCE: engine codes 1998 ford taurus

This can be an intensive fix but can be done with a set of good tools along with some air power.

Your Secondary air pump is on the fritz. It is located under the car on the subframe that your engine mounts to. What you need to do is to jack the car up & place the front on jack stands. You need to use a floor jack and support the front of the subframe and remove the plastic trim around the bumper area. Loosen the two main bolts that hold the front subframe to the main frame area. Lower the front subframe till you can see a black device located on top of the subframe, towards the front, and basically under the driverside headlight area is wear to look. There is a relay underneath the pump that can rust out easily due to the proximity to the weather. I would replace the relay first and then if needed, replace the pump.

Anonymous

  • 15935 Answers
  • Posted on May 21, 2009

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

89beac5.gif Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Anonymous

  • 224 Answers
  • Posted on Jun 29, 2009

SOURCE: 2003 Ford Taurus, 90K, used car, engines shakes, ABS goes on

Are you getting any codes from the Check Engine Light? This sounds like it could have something to do with a sensor. Check your air filter and make sure it's clean. The tach on my 1999 doesn't really work, but it hasn't coincided with other driveability problems. The engine doesn't change in it's RPM's, the tachometer just stops working. Have your charging system checked. The shaking might be coming from bad fuel pump operation, clogged fuel filter, or dirty fuel injectors. Try putting an additive into your gastank to clean the injectors (a bottle of Seafoam is great for this). Try calling your local Autozone and see if they do free trouble code scanning. This might help lead you in a better direction.

Anonymous

  • 708 Answers
  • Posted on Jun 29, 2009

SOURCE: 2000 Ford Taurus Flex Fuel V6. Check engine light

your code is or the following. Fuel Pump Secondary Circuit Malfunction. This may involve removing your gas tank to fix. Go to the parts store and they can get you the parts you need and let you know for sure.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Car won't start

Service records and what have you fixed lately. Does it crank fast or sluggish. Check fuel filter/pump. Spark plugs/coilpack. Intake hose make sure its properly seated to throttle body. Also is it duratec 3.0 or Vulcan engine?
0helpful
1answer

2000 ford taurus engine light came on. car idles real low when we come to a stop . to keep from the engine stalling out we put it in neutral and give it a little gas.

Check coil pack they can go bad even when not many miles. Also check plugs. Check the code see if it is a misfire. Vulcan or Duratec engine?
1helpful
1answer
0helpful
1answer

I need a belt for a 2005 ford taurus

Here are your belts,best to remove then take to Autozone to match up,here's how to replace.
0helpful
2answers

Is the 2000 ford taurus a non interference motor or an interference motor?

If you are referring to a dual overhead cam , It is a interference engine if its regular then no cansmo_130.gifcansmo_131.gif
0helpful
1answer

1999 Taurus, Vulcan engine, leaking rear main. How

Not sure how much it will cost you but my Alldata account has down about 8 hours of labor and about $50
0helpful
1answer

Car runs ruff at idle and stalls at lights

check the line going to the pcv valve, it may have split, vaccum leak..
1helpful
2answers

Replace ignition wires 2000 taurus

NO U DON'T HAVE TO TAKE THE MANIFOLD OFF, TAKE YOUR TIME, U WILL SEE HOW IT GOES THIS ONE IS EASY COMPARED TO MOST.
Not finding what you are looking for?

48 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...