SOURCE: where is the crank sensor located on 2005 chrysler pt cruiser?
the crank sensor is located on back right side of engine by were the trans. bolts up.is the no start when could or hot?
SOURCE: 2005 PT Cruiser leak anti-freeze leak????
the overflow bottle probobly has a crack in the seam of the bottle.you can replace the bottle or remove it and use some epoxy to repair it.
SOURCE: need location of crankshaft sensor-PT Cruiser 2005
It is located on the fire wall side of engine block just above the oil pan. Carefull as they tend to break in the block.
SOURCE: were i the crankshaft position
near the oil filter.. above it...under exhaust manifold one small bolt holds it on. If the is a no start condition look for frayed wiring near crank sensor..... it has a harness that hangs too low on some of those. & rubs on cv shaft
SOURCE: location speed sensor pt cruiser 03 touring car do
It sounds like the module is in limp mode. The speed sensor is most likely the cause, but it can be some other things as well. A scan will give a code stating the problem area.
The speed sensors are on the side of the trasmission that faces the front of the vehicle. There are 2 of them, and they are the same sensor. One is an input speed sensor located closest to the engine, the other is the output speed sensor.
899 views
Usually answered in minutes!
×