2002 Mercury Cougar Logo

Related Topics:

How to reset door locks 2002 mercury cougar - 2002 Mercury Cougar

5 Related Answers

Anonymous

  • 659 Answers
  • Posted on Dec 17, 2008

SOURCE: auto door locks

To activate the autolock feature, use the following steps:

  1. Enter the five-digit permanent entry code into keyless entry keypad (14A626) .
  1. Press and hold the 7/8 button on the keyless entry keypad within five seconds of entering the code.
  1. Press and then release the 3/4 button within five seconds of pressing and holding the 7/8 button.
  1. Release the 7/8 button on keyless entry keypad within five seconds of releasing the 3/4 button. To deactivate the autolock, repeat the above sequence.

Ad

Anonymous

  • 5158 Answers
  • Posted on Jan 12, 2009

SOURCE: question about buying a car

http://consumerguideauto.howstuffworks.com/1999-to-2002-mercury-cougar.htm

http://www.edmunds.com/mercury/cougar/review.html

http://www.carsurvey.org/reviews/mercury/cougar/2002/

Some websites to read up on it

Robert

Anonymous

  • 103 Answers
  • Posted on Sep 17, 2009

SOURCE: program fob/reset keyless entry pad 95 cougar

If you open trunk and look on inside of trunk where hinge bolts are you will see code numbers . Owners manual will tell you how.

Anonymous

  • 1 Answer
  • Posted on Oct 09, 2009

SOURCE: 2000 Mercury Cougar Power door locks do not work on either door

Power door locks are on the same fuse as the alarm system. The fuse is located in the passenger compartment fuse panel under the steering wheel. There is a pull down lever that will release the fuse box. The fuse for the alarm system/locking system is #25. Yellow color and a 20 ampere rating.

Anonymous

  • 2317 Answers
  • Posted on Mar 07, 2010

SOURCE: Headlight lens removal on 2002 Mercury Cougar

Several car wax companys make kits to clean the outside of the headlight lenses. Check your local parts stores. It's usally pretty hard to remove the len, they are often glued on.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2001 MERCURY COUGAR DOOR AJAR ALARM WONT QUIT BINGING EVERYTHINGS BEEN CLEANED AND WONT STOP PLEASE HELP

My 2001 Cougar control won't lock nor unlock the car and it just beeps rapidly when i press the controller, could it be the sensor on the door hinge? I noticed it's a little rubber boot. What could it be?
0helpful
1answer

New battery installed in 2002 mercury cougar, and the alarm goes off and the left and right blinkers flash.

It sounds like you have an aftermarket alarm system that has malfunction. Contact the manufacturer of the alarm for the reset procedure.
0helpful
1answer

94 cougar doorlock button on both doors will not unlock but it will lock

Seems like with a stroke of bad luck both switches went bad or u lose power to ur feed wire for the unlock side
0helpful
1answer

The Factory alarm keeps going off without pushing the panic button on the keys of my 2002 Mercury Courgar.

to eliminate the possibility the key fob is causing this, remove the battery form the fob-if it continues, you have an issue with a sensor on your alarm (either door or hood)-try locking/unlocking the doors manually, or check to see if the hood switch located on the passenger side under the hood is damaged or stuck open.
1helpful
1answer

Cost of replacing cpu/ecu in 2002 mercury cougar 2.5l engine

On your model it is called the PCM (standard terminology since 1996).
The PCM cost is $250.00+core charge
The time to required to replace about 1 hour, that would be about $95.00 most area's
So the out the door price about $350.00
0helpful
1answer

I have a 02 Mercury cougar the emergency flashers flash and the horn sounds at anytime, doors lock, unlock,engine running, not running. Raining ,sunshine . help

Check the power and ground connections that operate the computers on your car. This sounds more like an intermittent connection of some sort rather than an actually broken part.
11helpful
2answers

2000 Mercury Cougar Power door locks do not work on either door

Power door locks are on the same fuse as the alarm system. The fuse is located in the passenger compartment fuse panel under the steering wheel. There is a pull down lever that will release the fuse box. The fuse for the alarm system/locking system is #25. Yellow color and a 20 ampere rating.
2helpful
1answer

Need to replace driver side mirror on a Mercury Cougar 2002.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
1helpful
2answers

Fuse box

theres one under left side of dash and one on left fender well under hood
Not finding what you are looking for?

143 views

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...