I need to disactivated the alarm on my 1995 cirrus chrisler

Probly the factory alarm or aftermarket unit.

a small pool of oil on the out side of ignition wire chamber

In the transmission bell housing. In the rear.

Here is what I do on my 95 Cirrus I also do not have a keyless remote (well I do but is broke) and after frustation after frustation trying to disarm the factory alarm I find out that by unlocking the passenger front door with the ignition key from the outside will disarm it you may have to try few times before it's disarmed you need to make sure that the blinking red light stops blinking and all of the locks on all 4 door are up or unlocked, this is what I been doing for 3 years now and that's how I disarm the alarm on my car, I hope this helps.

close the doors lock the car with your key then unlock it. Mine once did this to me it was because i reached through the window to unlock the door instead of using the, what it is is a security feature that disables the fuel pump.

did you replace the battery???????? need more information??????? what caused this to start?

some times the battery in your remote is dead, replace the battery and try to lock and unlock with the key.

Do you have a (FOB) for your car, if so use the unlock button

to detailed to explain here. buy a hanynes repair manual at local auto store, 17$ it'll explain step by step.

if it is a factory system it can not be bypassed