1999 Nissan Altima Logo

Related Topics:

Toya Posted on Oct 10, 2016

What is the best way to take out a ignition switch on a nissan 1999 altama

5 Related Answers

Anonymous

  • 265 Answers
  • Posted on Dec 21, 2009

SOURCE: I have a 2005 nissan altama, where is the speed sensor located?

Need more info... What size motor, and why do you think you need a speed sensor ?

Ad

Anonymous

  • 11 Answers
  • Posted on Feb 18, 2010

SOURCE: Nissan Altama Fule gage, Temp gage have no power

Check Fuses!!!!!!!! that's what it most likely is.

Anonymous

  • 26 Answers
  • Posted on Apr 13, 2010

SOURCE: how do i acess an replace the fuel pump 1999

i think that it is in the gas tank you will have to drop the tank out of the car and the fuel pump is on the top of the tank held in with a retainer clip this has to be removed and you will be able to pull out the pump

Jeff Scott

  • 10 Answers
  • Posted on May 15, 2014

SOURCE: 1999 Nissan Altama was running fine until i took

hey how u doing on those cars it could be running fine with a cracked distributor cap but when water or moisture gets in it will cause it to stall I would check my fire first start with the cap hope this helps you.

Alex

  • 387 Answers
  • Posted on Oct 08, 2015

SOURCE: I have a 1999 Nissan altama after starting the car and get warm,I lose power and the car dies out on me,I did a full tune up except changing the distributor.

most likely the ignition coil

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why cant i shift my 03 nissan altama out of park

Check to see if you have brake lights. No lights, replace the brake switch at the pedal. This will fix the park problem. If you have lights, then it could be wiring or a bad solenoid at the shifter.
0helpful
1answer

Where is fuel shut off switch on 2008 nissan altama

Try the trunk. Not sure about the Altima, but many are in the trunk.
0helpful
1answer

Can you have the timing of a 2003 2.5 nissan altama 180 degrees out and the engine rotate without bending value

yes that would be possible if it's not an interferance engine , check that first nissan would be the best for that info , a phone call to their service department is all it would take
0helpful
1answer

1999 Nissan Altama was running fine until i took it and sprayed it off at the car wash ..then car stalled stopped running at traffic light.

hey how u doing on those cars it could be running fine with a cracked distributor cap but when water or moisture gets in it will cause it to stall I would check my fire first start with the cap hope this helps you.
0helpful
1answer

Replaced main window switch now dashlights dont work 1998 nissan altama

check the fuse box for dash illumination fuse , did you disconnect battery when changing window switch? if not possible to have blown a fuse
0helpful
1answer

How do i acess an replace the fuel pump 1999 nissan altama

i think that it is in the gas tank you will have to drop the tank out of the car and the fuel pump is on the top of the tank held in with a retainer clip this has to be removed and you will be able to pull out the pump
0helpful
1answer

Nissan Altama Fule gage, Temp gage have no power

Check Fuses!!!!!!!! that's what it most likely is.
1helpful
1answer

I have a 2005 nissan altama, where is the speed sensor located?

Need more info... What size motor, and why do you think you need a speed sensor ?
Not finding what you are looking for?

98 views

Ask a Question

Usually answered in minutes!

Top Nissan Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...