Recently I swapped the engine, transmission and steering column because I blew my 2004 2.3 engine. I put a 2006 2.3 engine, but the PCM continues to look for the ABS system that my 2004 doesn't have. Is there a 2006 2.3 Manual transmission PCM without the ABS system. Nobody, even the dealers seem to know. Please help. Thanks
SOURCE: 2002 MAZDA PROTEGE5 2.0L (manual transmission)
had the same on my girlfriends car. there is a tiny heatshild on the topside above the catalyic converter and there is also a small one on the seperate exhaust pipe (same pipe, but bolted on the headers and to before the cat) where is bends to connect to the headers to the back of the car.
SOURCE: Evaporative Emission System codes
check ur gas cap for tight and proper seal that is the most common problem for the the evap codes if cap is good check fuel and vent lines for damage or leaks from gas cap under vehicle up to engine compartment
SOURCE: 2004 mazda 3 AT with 57,000 miles.Wont accelerate
slight loss of power in mazda 2 code eac flashed up on oddometer whats this mean
SOURCE: ABS light on, flashing 4wd 2005 Mazda Tribute
Even though your anit-lock brake system light comes on, dosen't mean your brakes will not work. All the ABS does, when applying the breaks, it compensates breaking power like pulsating your pads off and on the rotor in which without ABS your doing the same thing manually by pressing n releasing the brake pedal. And usually half the time it's a sensor that goes out and can be checked at your local autozone or auto parts store where they can plug into your car and will display a code that pertains to your ABS problem. Hope this helps.
257 views
Usually answered in minutes!
×