SOURCE: jeep codes location of unit
Got me a complete manual for 199 jeep factory model and found location of each individual unit in question. Manual gives u possible solution to each code and repair and or replace. As a mechanic myself testing, trouble shooting and repair was not that difficult. Shift solenoid was very difficult to get to. Located under the head lamp passenger side.
SOURCE: 2001 Buick Century shift solenoid
It is in the side cover on the valve body. The transmission needs to be removed to access the solenoids.
SOURCE: How much will it cost me to fix the Pressure Control Solenoid
IT all depends on the labor rate of the shop you take it to,But the solenoid cost about 50-75 dollars and the side cover of the trans has to come off you will need a new gasket and about 4-5 qts of trans fluid.It takes me about 3 hours to complete this job if everything goes ok
SOURCE: have code p2716 pressure control d, will need help
Hello.
Before you start looking at replacing solenoids, here is something that you need to know:
Toyota has a technical service bulletin regarding this issue.
Changing the solenoids will NOT rectify your situation. Replacing the ECU in the car is what you need to do. The logic/programming is the problem, not the solenoids.
The good news is this: The ECU is covered, under the factory warranty! It will be replaced for free, if your car has less than 80,000 miles on it.
If you have more miles than 80K, call the Toyota Customer Experience Center at 800-331-4331; an analyst may be able to help offset your costs; they do this quite frequently.
This should get you fixed up. Thanks for visiting FixYa!
163 views
Usually answered in minutes!
×