2000 Ford Windstar Logo

Related Topics:

S
Scott Dunkle Posted on Oct 01, 2016

I need a diagram of the hoses on my 2000 Ford Windstar I can't find heater line

5 Related Answers

Anonymous

  • 39 Answers
  • Posted on Oct 11, 2008

SOURCE: diagram bypass heater cord on 2001 ford expedition eddie bauer

the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply

Ad

Anonymous

  • 1 Answer
  • Posted on Feb 28, 2009

SOURCE: i have a 2000 ford windstar no heat still

My 99 windstar did this too. It was the blend door that the actuator motor goes into was broke. When you pull the actuator out look into the hole and see if you see a d shape piece coming out of the box if it is not d shape it is broke check out this site great photos

gerry bissi

  • 4390 Answers
  • Posted on Sep 18, 2009

SOURCE: Want to find heater hose diagram

please rate. thanks.

Heater Water Hoses


e677c65.gif

Item Part Number Description 1 N610956-S56 Screw 2 18472 Heater Water Hose, Supply 3 18472 Heater Water Hose, Return A — Tighten to 7-9 Nm (62-79 Lb-In)

Anonymous

  • 145 Answers
  • Posted on Sep 30, 2009

SOURCE: wiring diagram for ford windstar 1998

i assume its a 3.8L
http://host-comp.com/281774/va102115.pdf

Anonymous

  • 80 Answers
  • Posted on Jul 21, 2010

SOURCE: need fusebox diagram for 1999 Ford Windstar SE



ef07f16.gif 342512b.gif


4cdb386.gif


58765ab.gif


Hope this helps.. :-)

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Heater hose/core diagram for a 2001 ford windstar. I have a leak I am trying to repair and need to know where to locate hoses and core.

while facing motor it would be left side. 2 hoses running into fire wall. although not 100% sure heater core is most likely behind glove box.
1helpful
2answers

2003 ford windstar, my heater hose is leaking at the connection to iron pipe, I need a diagram to figure out how to fix

Most likely while you are in there it's time to replace the hose. Saves having to go back if it starts leaking on the other end which is highly likely given the age. There should be a return heater hose, it is probably in similar condition. Diagram may be available via google. Youtube may show you how to. A very bright led flash light will allow you to see and trace the heater hose. You'll need to drain the radiator save the antifreze if new. Replace if old. Any other cooling system hoses need to be replaced? How is the water pump. It's not the leak is it? Otherwise Library probably has repair manual, or may be time to invest in repair manual. Lightly used may be available on Ebay and others. New hoses are cheap insurance against possible failure.
0helpful
1answer

When filling my 2000 ford windstar with gas it wont go in the tank it just flows back out the fill tube,what could be wrong

lok at answers I sent pinched filler neck hose or kinked vent hose,or obstruction in line
1helpful
1answer

Looking for a diagram for 2001 Ford Windstar - Heater Vacuum Hose. I believe that is why the heater only works when the engine RPMs are up

this is kind of vague, so please dont give me a bad vote but it sounds like your heater control valve is defected.
0helpful
1answer

2000 windstar is leaking coolant behind motor and smells with ac on...Heater core?

Yes u have a leaking heater core, below fin d the instructions to replace it.
1997-2000 Ford Windstar 3.8
Heater Core
Inspect ' Replace
Drain the cooling system

Heater Housing

The heater housing is usually under the dash and must be removed to gain access to the heater core. Procedures for replacing the heater core vary with the year, make, and model of car. It is therefore necessary to consult the manufacturer's repair manuals for the proper procedure for replacement.
The heater housing is disassembled to get to the heater core.
Heater Core Remove the access panels(s) or the split heater/air conditioning case to gain access to the heater core. Remove the heater coolant hoses. Remove the cable and/or vacuum control lines (if equipped). Remove the heater core securing brackets and/or clamps. Lift the core from the case. Do not use force. Take care not to damage the fins of the heater core when removing. To reinstall the heater core, reverse the removal steps. When the heater core leaks and must be repaired or replaced, it is a very difficult and time-consuming job primarily because of the core's location deep within the firewall of the car. For this reason always leak test a replacement heater core before installation.
6helpful
1answer

Serpentine belt diagram

2000 FORD WINDSTAR - V6 3.0L 182ci GAS FI N U
Belt Routing Diagram Multiple Accessory, w/A.C.

2736613.jpg



2000 FORD WINDSTAR - V6 3.8L 232ci GAS FI N 4
Belt Routing Diagram Multiple Accessory, w/A.C.

a00aa8f.jpg

Also, in the Windstar Owners Manual can find additional information.

I really hope helps with this (remember rated this help) Good luck.
3helpful
2answers

Want to find heater hose diagram

please rate. thanks.

Heater Water Hoses


e677c65.gif

Item Part Number Description 1 N610956-S56 Screw 2 18472 Heater Water Hose, Supply 3 18472 Heater Water Hose, Return A — Tighten to 7-9 Nm (62-79 Lb-In)
0helpful
1answer

2000 ford windstar i have heat in the back but not in the front

there is 2 deffrent heater core in ur car try maybe the front one in blocked u can check this by feel both the front heater core hose have alomst same temp .
Not finding what you are looking for?

942 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...