Question about Jeep Cars & Trucks

2 Answers

Location of bank 1 sensor 1 o2 sensor 0n a 6 cylinder jeep grand Cherokee laredo

Locations

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 53,755 Answers

---V6--- bank 1 is the bank on the left looking at the engine from the front
sensor 1 is the heated oxygen sensor (HO2S) in the exhaust manifold or pipe before the cat converter
the oxygen (O2S) is a totally different unit located after the cat converter
so you have to decide if it is a heated oxygen sensor or a simple oxygen sensor
if the engine is a straight 6 cyl engine then there is only one exhaust manifold but the HO2S and O2S are locate din the same places ( before and after the cat converter

Posted on Sep 29, 2016

Ad

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 2,760 Answers

Bank one is left side top of engine standing looking at it , O2 sensor is located on exhaust manifold there is one on each manifold (right-left)

Posted on Sep 29, 2016

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need the location of O2 sensor (Jeep Laredo 2012 V6 3.7L Oxygen Sensor 1/1 Location)


They should be a welded receptacle - one just in front of the CAT and one just after the CAT. They usually have a teflon wire leading to them which is distinctly different than other wiring in the car.

Feb 26, 2018 | Jeep Cars & Trucks

1 Answer

I HAVE TO CHANGE OUT A CRANK SENSOR IN MY GRAND CHEROKEE.


Jeep Crank Sensor Replacement, P Codes P0351, P1391 ...

? 6:24
www.youtube.com/watch?v=7D0vUEDSwXo
May 12, 2013 - Uploaded by Robert DIY Replaced the crank sensor on this 2003 Jeep Grand Cherokee.... to replace my crankshaft position sensor on my 1998 grand cherokee laredo.

Jeep Crankshaft Position Sensor Replacement (CKP, CKPS ...

? 4:07
www.youtube.com/watch?v=1Ho5iAKQV00

Oct 27, 2013 - Uploaded by WeekendHandymen
hi , do you think if I replace crank sensor will solve the problem ,my jeep .... Where's the crankshaft located in 99 jeep grand Cherokee laredo .


Oct 24, 2015 | Cars & Trucks

2 Answers

How many airbag sensors in a 2008 gmc acadia


1) Front End Sensor - Right--Located under the front hood in the engine compartment (2) I/P Air Bag--Located at the top right under the instrument panel (3) Roof Rail Air Bag - Right--Located under the headliner, extending from the passenger front windshield pillar to the passenger rear windshield pillar (4) Side Impact Sensor (SIS) - RF--Located under the right front door trim near the lower rear of the door frame (5) Sensing and Diagnostic Module (SDM)--Located underneath the vehicle carpet under the center console (6) Seat Belt Pretensioner - RF--Located under the trim near the bottom of the center pillar (7) Side Impact Sensor (SIS) - RR--Located under the right rear door trim near the lower rear of the door frame (8) Roof Rail Module - Right--Located behind the garnish molding on the upper rear pillar (9) Roof Rail Module - Left--Located behind garnish molding on the upper rear pillar (10) Side Impact Sensor (SIS) - LR--Located under the left rear door trim near the lower rear of the door frame (11) Seat Belt Pretensioner - LF--Located under the trim near the bottom of the center pillar (12) Side Impact Sensor (SIS) - LF--Located under the left front door trim near the lower rear of the door frame (13) Roof Rail Air Bag - Left--Located under the headliner, extending from the driver front windshield pillar to the driver rear windshield pillar (14) Steering Wheel Air Bag--Located on the steering wheel (15) Vehicle Battery--Located at the front left of the engine compartment. (16) Front End Sensor - Left--Located under the front hood in the engine compartment

Aug 12, 2015 | GMC Cars & Trucks

2 Answers

My car smoke while the engine is on


Turn it off. Dont lift the bonnet until its cooled down.
have patience and then pull up the bonnet to see where the problem is.

Jul 22, 2015 | 2007 Suzuki Forenza Sedan

3 Answers

Squealing noise in park


If youre just idiling, then it may just be the serpentine belt that needs to be replaced.

Mar 05, 2015 | 2004 Jeep Grand Cherokee

2 Answers

Fireing order diagram


cylinder firing order is: is 1-5-3-6-2-4 .... In Jeep Grand Cherokee Laredo ...Happy motoring.

Sep 04, 2014 | 1996 Jeep Grand Cherokee

2 Answers

When driving sounds like an electric motor is running


Check power steering fluid and or tranny fluid.if low check for leaks.,., fix or repair.,., or just fill see if it stops. Do not over fill .,.? , get back to me

Apr 08, 2014 | 2008 Jeep Compass

1 Answer

Need the location for replacement of o2 sensor bank 1 sensor 2 on a 2004 jeep grand cherokee


O2 sensors are in the exhaust pipes, bank one is on the side with cylinder 1 and sensor two is after the catalytic converter.

Sep 29, 2013 | Jeep Cars & Trucks

1 Answer

O2 sensor bank 1 sensor 2 replacement instructions 2004 toyota tacoma v6


LOCATIONS There are different locations in the exhaust system where O2sensors are positioned. The locations have been given numbers and will be used in the accompanying charts to identify the positions of O2sensors in most vehicles. Due to mid-year production changes or factory inconsistencies, all models may not be covered. If a vehicle being serviced is not covered in the charts, inspect the exhaust system (while cold!) in the general locations to find the applicable O2sensors. NOTE: If equipped with dual exhaust systems, there may be up to 4 or 5 O2sensors in the exhaust system. Be sure to locate all of them before commencing with any testing or service. Fig. 1: Location No. 1 - down pipe 79248g01.gif
Fig. 2: Location No. 1 - typical O2sensor located in the exhaust manifold 79248g04.gif
Fig. 3: Location No. 2 - left and right banks of a V-type engine 79248g02.gif
Fig. 4: Location No. 3 - exhaust collector (where more than 1 pipe joins together) 79248g05.gif
Fig. 5: Location No. 4 - outlet of the catalytic converter 79248g06.gif
Fig. 6: Location No. 5 - inlet and outlet of the catalytic converter 79248g03.gif
93028c01.gif
93028c02.gif
prev.gif next.gif

Nov 12, 2010 | Toyota Tacoma Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

2,151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...