See this Pelican Parts instructions to remove the rear bumper on your 1977 530i..
http://www.pelicanparts.com/BMW/techarticles/BMW-5-Series-E39/34-BODY-Rear_Bumper_Removal/34-BODY-Rear_Bumper_Removal.htm
SOURCE: remove the rear bumper
Removing Prowler Rear Bumpers First remove the four 10 MM bolts holding the trans cooler and drop it down. Support it by attaching one bolt to the lower hole on the cooler frame. This will keep the weight off the lines. This takes two min. and allows easy removal of the elect. lines. Then remove the four bolts on each bumper. The bolts are 13MM and 17MM. You will need a ratchet, sockets, extension and a 13MM open end wrench. If you remove the rear bumpers, you should replace the rear pan with one of the aftermarket ones otherwise you will have big holes staring at the people behind you. Go to prowleronline.com and check the vendors for a couple of options. Maybe you are removeing them to paint and reinstall. Look at this link for some options .. Mine is the 7th post down. http://www.prowleronline.com/ubb/Forum1/HTML/014949.html Hope this helps.
SOURCE: Remove rear plastic bumper cover
please email me at [email protected] with any other info or questions if you have already gone to a body shop
SOURCE: REMOVAL OF REAR BUMPER COVER ON 1997 DODGE STRATUS
See under the bumper its strap with clips,you must take it out from it,
Testimonial: "I found out there are clips on each side of the b umper under the rear 1/4 panels as well. thanks"
SOURCE: how to remove frt bumper on 325 bmw
remove 8mm screws at r and l side splash sheils, remove t 50 torx bolts under bumper cover on either sdie of where the front lic plate cover goes, pull away from body of vehcile and disconnect the fog lights if equipped
SOURCE: Volkswagen Passat rear bumper removal
all the screws/bolts are underneath the plastic cover.hex head.(allen key)
89 views
Usually answered in minutes!
×