SOURCE: torque specs for toyota tercel
Hello vienotkelly: The correct Main bolt torque is 42 foot pounds. The connecting rods torque to 29 foot pounds. The torque sequence for the head bolts and the correct way to tighten the bolts are attached to this reply. Thak You for using FixYa. Roger
SOURCE: torque specs for 1998 tercel 1.5L
Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.
Hope this helps
SOURCE: need torque specs for a 2002 toyota camry 2.4 for
The 2002 2.4 engine head bolts are 'torqued to distance'.
First, install all the bolts, and, in a sequential fashion, starting at the innermost, working outward, torque all bolts to 70 N-m/806 kgf-cm/58 foot lbs.
Next, mark the front side of each head bolt with a dot of paint. Retighten te cylinder head bolts 90 degrees, starting at the inner 2, and working outward.
We hope that this helps you out.
SOURCE: manual for toyota yaris
I have seen one for 2007 yaris in PDF format. It should hopefully help you a bit. Google it & you will find it.
SOURCE: whats the valve clearance for toyota 4k engines
valve clearance is .20mm for the intake and .30mm for the exhaust. Will try to find cylinder head torque for you.
1,405 views
Usually answered in minutes!
×