2002 Audi A6 Logo

Related Topics:

Posted on Aug 31, 2016

02 Audi a6 quattro lock shift solenoid code but not stuck what's the problem

5 Related Answers

Anonymous

  • 6 Answers
  • Posted on Jun 23, 2009

SOURCE: 96 Audi A6 Front Bumper

No, they are not. THe A4 and the A6 chassis are different, the bumpers have a similar style and look to them, but they are not interchangable.

Ad

Anonymous

  • 1 Answer
  • Posted on Jul 17, 2009

SOURCE: In my 1999 Audi A6 Quattro the BATTERY Went out

hi i have a 2002 Audi A6 Quatro turbo and wanted to know where is the alternator located and is it easy to take out and replace it.

Anonymous

  • 4 Answers
  • Posted on Jul 30, 2011

SOURCE: My 2000 Audi A6 Quattro's driver door will not

Chances are it's the door mech that's gone it needs to be broken from the inside any dealer or specialize garage should be able to do this

Anonymous

  • 1874 Answers
  • Posted on Jun 16, 2012

SOURCE: timing belt 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)

Timing belt routing diagram for 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)

I can not insert the picture here because bad page. Send me your e-mail address, and I will send you back the picture.

Anonymous

  • 1 Answer
  • Posted on Jun 24, 2013

SOURCE: 1999 AUDI A6 avant 2.8L quattro. Car vibrates

Check your ignition coils. I had the same problem on my 2002 Audi a6 3.0 quatro. Tiptronic transmission. I was driving down the road and all if the sudden the car started vibrating violently to. I thought I had a flat tire so I pulled over and checked but there was no flat tire. The more I accelerated the more it would vibrat. Changed my ignition coils and the problem went away.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What makes Audi A6 c6 2.4 2007 multitronic gearbox not to change gears or even to move

gee a 20cent blown fuse is cheaper.'
check all fuses
then scan the PCM for tranny errors. using a scan tool.'
there are near 10 on car checks on any failing A/t seems you skipped all that.
USA car or not?
we oops no 2.4l here USA> so you are posted outside USA and didnt say so first.
ours has 7 solenoids in the box. tranny, and if the TCM is not happy how and can it shift right.? and EPC inside to set pressures right.
ours uses A6 Quattro; Trans. Code 6HP19A;
I say check all fuses., then scan the pcm/tcm
then ask for help with P07nn or P17nn errors called DTC's

the box is 100% electronic shifted, how can you forget to check status of the TCM./
0helpful
1answer

How to get Audi '02 A6 Quattro from Park to Drive

Most times the brake pedal switch is bad. Other times the shifter solenoid is bad.
0helpful
1answer

I have a 1997 audi a6 Quattro awd and I'm getting

these are sensors in the box. TR sensor/switch--shift solenoids---transmission mechanical fault.
Check all wires and connections. replace the TR sensor /switch for both gears
0helpful
2answers

Audi a6 Quattro won't shift right

Bad transmission, shifter, or clutch.
0helpful
1answer

My audi a4 quattro 1.8 turbo has a code p0758

hello, that is Shift Solenoid B Electrical problem.
it may be a open or short in shift solenoid valve in circuit, or shift solenoid valve trouble, or ECM trouble
try to have a check

good luck and greetings
3helpful
1answer

My 2000 Audi A6 Quattro's driver door will not

Chances are it's the door mech that's gone it needs to be broken from the inside any dealer or specialize garage should be able to do this
0helpful
1answer

My 1998 Audi A6 power windows not working

Check wire harness between driver door and body for broken wires.Wire harness bends , when door opens and closes so it may brake the wire or two inside harness.
0helpful
1answer

Audi Quattro A6 will not go into drive

It's the brake pedal switch. There is a switch down on the pedal arm that closes when you press the pedal down, and sends a sensing voltage to the controller, telling it the brakes are applied. This allows the transmission lock to disengage so you can shift out of Park. When that switch fails, the lock won't disengage. You need to replace that switch and you'll be fixed.
Not finding what you are looking for?

116 views

Ask a Question

Usually answered in minutes!

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...