How long to change knock sensor in 2003 Oldsmobile Silhouette?

SOURCE: 99 olds silhouette flush and fill

Use a Turkey Baster to **** the extra fluid out.

SOURCE: 2002 Oldsmobile Silhouette ABS Light is on and

The first thing i would check is all 4 abs sensors at the wheels.You can do this with a volt meter set on ac voltage and spin the wheel if it generates voltage at all on the meter its good.

SOURCE: where is the low coolant sensor in a 2000

It is usually a wire like gadget which projects down into the coolant overflow tank. If the coolant gets too low, an electrical circuit is closed (or opened) and a warning light is activated.

SOURCE: how do i replace a knock sensor?

there is two places were might be the knocking sensor mount , one might be over the main axle motor near the long belt at the front face of engine second might be when the engine and shift boxes been mount over the starter zone , but the problem you have show might be the valve or the knocking axle

SOURCE: 1999 Oldsmobile silhouette brake light and tcs

check the abs sensors common to hit or damage the wiring or knock connection loose when doing a brake job the traction control system[tcs] is tied into the abs system