I changed the radiator and now the ac does not blow cold air.
You really do need to burp the radiator after replacing it, but that should make the A/C not work. I suspect there is a connector that came off of a pressure sensor on the A/C condenser. That condenser is right next to radiator.
I did burp the radiator very well. I can not find the pressure sensor. Do I need to pull the radiator back out to get to the A/C condenser?
I had a TSX, not a TL, but I am pretty sure the condenser is right in front of the radiator and looks much like a smaller radiator. I think the sensors are on the side of the engine compartment. If you see the canister with the little sight glass, you can follow those lines to see where they attach to the compressor and condenser. You will see at least one place where wires are connected.
×
130 views
Usually answered in minutes!
×