Can I connect a astrostart remote key to my '08 Chevy uplander?

Key fob or hatch lever near the symbol on the hatch door. You didn't indicate a particular problem but here are some videos that address a variety of situations:

2007 Chevy Uplander - Fix and Maintain those Power Sliding Doors (youtube.com)

2007 Chev Uplander Door Lock Repair - Doors won't Lock (youtube.com)

This Is CLE (youtube.com)

SOLVED: Chevy uplander rear liftgate will not unlock - 2005 Chevrolet Uplander ' Fixya

I have been searching 10 minutes and find nothing regarding it being compatible. Your best bet is to go to a local alarm installer and ask them to set it up. Or just try it.

https://www.google.com/search?q=AstroStart+rs415
AstroStart 2611D-TX 1-Way 1 Button DS4 Replacement Remote Control Transmitter

• AstroStart Model 2611D-TX
• 1-Way 1 Button Replacement Remote Control Transmitter
• Orange LED
• FCC ID: EZSDEI7616
• Includes Key Ring
• Compatible with **** DS4 / DS4+ Systems ****
• Up to 1/2 Mile Range
• Uses CR2016 Batteries (included, in remote)

Remote starters are full of problems.

The Astrostart has clashed with the alarm.

Code 3. Stopped by alarm

The key on the dash is telling you that there is a security alarm and immobilizer issue.

Astrostart Alarm Key Fob Remote Programming Instructions

1. Open you hood. If needed, jump the red/black wire to a good ground.
2. Turn the key on, press and release the brakes.
3. Turn key from on to off 3 times. (OFF - ON - OFF -ON - OFF) The Park lights will blink 4 times. ...
4. Push any button the first remote to be programmed. Repeat for all remotes. ...
5. Turn key on and press brakes once.

[PDF]MODEL RSS-5225 - DirectedDealers.com

www.directeddealers.com/manuals/OG/Astrostart/RSS-5225_OG-Eng.pdf

Immediately report any malfunction to the AstroStart dealer that performed the ... Always turn off the main switch when not using the remote starter for .... The startmodule will inform you of the status of door locks, the alarm and of the engine. .... If the trunk is opened for more than 5 minutes, the system switches to the.

How do you reprogram an AstroStart remote HST5224

www.answers.com > Wiki Answers > Categories > Cars & Vehicles

In order to reprogram an AstroStart HST5224 remote, you must putthe key in the ignition ... lamp) b, press and hold UNLOCK button, after 1 second key LED will flash once c, .... C. Turn the ignition to ON (Do NOT Start) then back to OFF. ... B.Immediately after letting go of the lock and unlock buttons, press the lock button by ..

O2 sensor are located on exhaust system. whatever the system

hope it helps

should be under hood, DECAL , or near belt location

This is a common problem with the Uplander Chevy has updated the fuel lever sensor,it has something to do with the printed circuit on the ceramic card,you will need a new fuel lever sensor TSB Bulletin 07-08-49-013

There are no keyless entry remote self-programming instructions for the 2008 Chevy Uplander. You must get an Automotive Locksmith to program the remote to your vehicle for you.

call 509-456-7890 they maybe able to help!!!