At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I don't see why it would not work. The ecm would not have any connection with the drivetrain other than the engine. The prom or chip should change the settings for timing and other factors.
Hi,
Here is a detailed solution on how to reset your 1992 camry;
1.Open the fuse panel cover in the driver's side footwell by pulling down on the fuse panel cover. 2.Locate the fuse for the electronic control unit, or ECU. 3.Pull the ECU fuse using the fuse pullers in the fuse panel. 4.Turn the ignition to the "On" position and wait five minutes. Then reinsert the fuse. The check engine light will blink several times before going out. This will reset the computer on your 1992 Camry Thanks..
G'day mate yes you have a prob and i think it is empty 'transfer' case Toyota had a big prob with transfer case pushing oil into gearbox , result transfer case empty gearbox full. fix is when you get the transfer case off (maybe have stripped and checked ) then drill a small hole in the front of the transfercase at gearbox filler bung height and run the same oil in both if its a manual that is. hope this helps
Check the circuit opening relay, located behind glove box or kick panel on right.
Look for signs of corrosion, this fuse only powers the fuel pump and the engine ecu
Unless your rocky was custom or rebuild, the four wheel drive on the 90-92 rocky is not auto engage. it is manual. you have to use the four wheel gear shifter located left of the main gear shifter.
×