Cars & Trucks Logo

Related Topics:

tha main koko Posted on Jun 18, 2016

Peugeot307 doesnot start from ingnition key anymore except i start it from the kick starter directly,i noticed it started showing some signs on dashboard like;S and * beside the gear selector light

5 Related Answers

Anonymous

  • 9 Answers
  • Posted on Apr 09, 2009

SOURCE: 87 corvette no start, power is good, all lights work

you can try bypassing it like this turn the key on then take a screwdriver and touch the 2 bolts on the starter try that or try changing the fender mounted starter selonoid

Ad

Anonymous

  • 2 Answers
  • Posted on May 02, 2009

SOURCE: D4 gear lights ( dashboard ) starts blinking even I'm using other gears

Blinking D4 can also mean electical problem. In my case it was ignition switch's life comming to the end. If my ignition switch was finaly dead and I replaced it with a new one D4 was not blinking anymore. If you have problems with ignition switch, for example it will not start engine at first time try to replace it before it will break on the road in least expected moment. I have '95 odyssey. The ignition switch is faulty in time, it was subject of honda factory recall.

Anonymous

  • 1 Answer
  • Posted on Feb 23, 2011

SOURCE: 2008 Jeep Patriot will not start sometimes. Turn

Did you ever get this problem solved. I'm having the same problem.

Anonymous

  • 3400 Answers
  • Posted on Apr 03, 2011

SOURCE: I turn key on my

First, you have a bad solenoid. Trans issue sounds like clogged trans filter - flush and change trans fluid & filter.

Stan Ford

  • 3131 Answers
  • Posted on Jun 23, 2011

SOURCE: car will not start, when l turn key there is no

If as you say the starter motor & the imobilisor test ok . have some one hold the key in the start position & check voltage at starter motor to ignition switch wire.ignition switch may be at fault

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

Turn key. starter engages flywheel engine start to turn over. Then starter disengages form flywheel but continues to spin without care actually starting.

There maybe a problem with starter motor? Some of the national brand auto stores will test starter for you. Of course, you have to take it off and take it to them.


You could take the starter off, lay it on the ground, Hook up jumper cables properly from starter to battery. The starter should kick-out the drive gear and spin. If starter drive gear kicks out and in, something is wrong. Anymore I replace starter solenoid and starter motor as an assembly.

It wouldn't hurt anything to check flywheel teeth while your at it.
0helpful
1answer

WHY MY TRUCK WILL NOT START

Hi,
If the panel is ok and it's not dimn when you try to start than you have to check on the starter fuse, starter relay and if this are ok than on the starter motor it self there is a positive caple which comes direct from the ingnition power supply chech if its having current when you turn your keys to start position if its having than try to start the starter motor direct by bridging the caple on the solonoid and starter direct which it have to start the vehcile. If it failes than remove the startor for repair.
Regards,
Emmanuel.
0helpful
1answer

WWell when I got the bronco it was rrunning fine,my stepson drove it to me, about 5 miles about 500 ft from my house its lights started flashing and it quit,when he tried to start it,nothing,battery...

I need to know model year? I looked at wiring for 1990 ford bronco. 5.oL engine.
The gasoline engine shows a starter relay that is not mounted to starter motor.
The diesel engine showed starter solenoid mounted to starter. I'm not sure which engine you have? They both have a starter relay.
I think your headed in the right direction, I need more info.
0helpful
1answer

Ingnition problem

Sounds like it could be the switch, you can bypass the ignition switch and touch the two positive wires together from the solenoid to see if it cranks over. Be very careful make sure it is in not in gear.
0helpful
1answer

Starting the car

Replace the starter solenoid,contacts inside it are burnt
0helpful
1answer

I cannot get into my honda 2002 crv. Both electric keys don't work. Can unlock only drivers side with the keys. Try to open any other door ... nothing ! Put key in ingnition absolutley nothing !! as if...

Honda uses a main fuse under the hood near the battery, if the car is completly dead, no lights, no horn. then I would start there.
Follow the red positive cable from the battery to each stop, you should locate a fuse. If the cable goes directly to the starter, then look for the power distrubution box, check for the main fuse or breaker there.
Hope this is of some help.
Ed
Not finding what you are looking for?

62 views

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...