I have a 1999 Acura TL that had a bad crankshaft position sensor. I have replaced it and now the vehicle is running even worse doesn't anyone have any idea what could actually be wrong?

SOURCE: 97 Astro crankshaft position sensor

HI..
Tha crank position sensor On your astro is located.
On front of the engine on timing cover, left side.
Behind the crankshaft pulley. with a connector of 3 wires.

I hope this work for you.

SOURCE: 2004 sentra 1.8L

check the fuel pump first.after that check the fuel filter. probably it is clogged.these parts are loacted in your fuel tank floater.remove the back seat.remove the screws.your car is young so the crankshaft position sensor must be working properly.

SOURCE: Check Engine light on Acura TL 3.2 1999

You can turn off the Check Engine light by either disconnecting the battery or by using a code reader to clear the codes. However, if the problem still exists it will come right back on. Instead you should get the code read, find out what the problem is, and fix it. Your local autozone or checker auto parts store will read them for free.

Greg Bernett

• 2993 Answers
• Posted on Jun 25, 2009

SOURCE: how can i replace the crankshaft position sensor

Fig. 2: Location of the crankshaft position sensor on 2.4L engines

Colin Stickland

• 22516 Answers
• Posted on Jun 28, 2009

SOURCE: My Hyundai Elantra 1999 crankshaft position sensor A circuit

could be ??the windings in the sensor have the insulation on the way out