Question about 2002 Chrysler Sebring

1 Answer

Camshaft replacement 2002 chrysler sebring

Had it towed to garage they said needed replacement

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 14,585 Answers

This is a bit of work. I done plenty of head work. Rarely are the cams worn enough to replace. I would bet they are throwing them in for more money. If the cams are worn you either have really high miles or there wasn't enough oil to keep them lubed. That is another problem in it's self. I think I would get a second opinion. Sounds to me the timing belt broke. And on some of the Chrysler engines, this trashes them. Interference engines.

Posted on May 17, 2016

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 chrysler sebring 2.4l dohc.


Have you ever replaced the timing belt?? If not the problem is likely to be a loose worn out timing belt. A floppy belt will play havoc with the sensor signals and trigger a check engine light and a camshaft sensor code.

Jun 22, 2012 | 2002 Chrysler Sebring

1 Answer

Where is the CSS on a 2002 Chrysler sebring


I think you are referring to either a Crankshaft position sensor or a Camshaft position sensor. I've included a tutorial video below:


May 31, 2012 | 2002 Chrysler Sebring

2 Answers

I have fault codes P1684 & P0340 on my 2002


P1684 The battery has been disconnected within the last 50 starts.

P0340


This indicates that a problem was detected in the camshaft position sensor circuit. Since it says circuit, that means the problem could lie in any part of the circuit - the sensor itself, the wiring, or the PCM. Don't just replace the CPS (camshaft position sensor) and think that will definitely fix it.
Symptoms Symptoms can include:
  • Hard starting or no start
  • Rough running / misfiring
  • Loss of engine power
Causes A code P0340 could mean one or more of the following has happened:
  • a wire or connector in the circuit could be grounded/shorted/broken
  • the camshaft position sensor may have failed
  • the PCM may have failed
  • there exists an open circuit
  • the crankshaft position sensor may have failed
Possible Solutions With a P0340 OBD-II trouble code, diagnosis can be tricky at times. Here are some things to try:
  • Visually inspect all the wiring and connectors in the circuit
  • Check for continuity in the circuit wiring
  • Check the operation (voltage) of the camshaft position sensor
  • Replace the camshaft position sensor as required
  • Check the crankshaft position circuit as well
  • Replace circuit wiring and/or connectors as required
  • Diagnose/replace the PCM as required

May 30, 2011 | 2002 Chrysler Sebring

2 Answers

2002 Chrysler Sebring goes dead while driving. Headlights radio etc works. Won't start. All dash lights came on. Towed to garage


It could be anything from a bad fuel pump to an ignition modual, any number of sensors or relays. Hopefully it's something simple, Merry Christmas!

Dec 19, 2009 | 1990 Pontiac Grand Prix

2 Answers

2002 pt cruiser replaced camshaft position sensor still not starting wires are good


if you replace the crank sensor and camshaft sensor you need a DRB scan tool reprogram sensor to pcm.so they will work.

Dec 06, 2009 | 2002 Chrysler PT Cruiser

1 Answer

Can i replace the camshaft sensor on my sebring


the camshaft sensor is not sold separately for a 2.5 engine,it is mounted in the distributor and you would have to replace the whole distributor!

Dec 05, 2009 | 2000 Chrysler Sebring

3 Answers

Timing belt is broken on a 2002 sebring


The engine in your car is not an interference engine if it is a DOHC (Double Overhead Camshafts), if it is a SOHC (single Overhead Cam) then it is a interference engine u have bent valves and the head will need to come off for repair My reference Gates timing belt catalog. U will need a shop manual to replace the belt also a really good set of hand tools, u will also need to replace the water pump which is driven off the timing belt.

http://www.gates.com/downloads/download_common.cfm?file=428-1466_web.pdf&folder=brochure

Apr 30, 2009 | 2002 Chrysler Sebring

1 Answer

Replace air filter 2002 Chrysler Sebring convertible 2.7L engine


you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.

Apr 10, 2009 | 2002 Chrysler Sebring

1 Answer

Car turns over but no start


Sounds like the "CPS" camshaft position sensor.

Nov 29, 2008 | 2002 Chrysler Sebring

Not finding what you are looking for?
2002 Chrysler Sebring Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...