What are the torque specs for the main and rod bearing caps?

Ford Windsor Torque Specs - Help Center - Summit Racing

https://help.summitracing.com > answers > detail > a_id
Apr 11, 2018 - Main Cap Bolts, 60-70 ft.-lbs. ; Connecting Rod Bolts, 22-25 ft.-lbs. (40-45 ft.-lbs. for 289TP and Boss 302) ; Cylinder Head Bolts, 65-72 ft.-lbs ...

Bolt Torque Spec Chart for Ford Engines - Maine Mustang

http://mainemustang.com > 65-73 Mustang Data
Ford Engine Bolt Torque Chart ; Main cap bolts, 60-70 ft-lbs ; Outer 2 bolts of main cap bolts, 35-40 ft-lbs.(for 4 bolt main bearing caps only ) ; Connecting rod ...

5.0 HO Engine Bolt Torque Specs - Foxstang.com

https://www.foxstang.com > 5-0-ho-torque-specs
Feb 21, 2020 - 5.0 HO (302) Head Torque Specs · Step 1: 23-35 FT/LBS · Step 2: 45-55 FT/LBS · Step 3: Additional 90 degrees (or 75-85 FT/LBS) · Use tightening ...

Question edited to add maker (should have model and year).
Question moved to Isuzu category.

https://www.google.com/search?q=10pc1+main+bearing+torque+specs

Isuzu Torque Specificiations

http://www.webautorepair.org > isuzu-torque-specs
Crank case Main Bearing side bolt Torque: 39 N·m (29lb ft) Connecting Rod Cap bolts Torque: 54 N?·m (40 lb ft). Install main bearing caps, oil gallery and crank ...

..

Torque Specs Database

Type: Dim: Length: Head: Nut Grade: 20 Ft-Lbs 240 In-Lbs 27.12 N-m Connects: Connecting Rod To Engine Block Years: All Vote Record: Vote Note: Vortec - Rod Cap Nuts - 2 Steps: 20 FtLbs; +70degs

http://ww2.justanswer.com/uploads/ZZdaryl/2009-06-14_153454_torque.pdf

Main Bearing Cap Bolt 4.3L Step 1 15 ft lbs (20) Step 2 Additional 73 Degrees

i don't know if that's correct for main bearing caps since another link states it's much higher

4 3 Vortec Piston Specs eHow

hopefully a GM guy will chime in to confirm the main bearing torque

the rod bearing torques are the same on all the other links

the specs for the 1991 prelude with a 2.1 engine are, the connecting rod caps are 34 ftlbs and the main bearing cap are 49 ft lbs, hope this helps,

TORQUE SPECIFICATIONS kia rio
Cylinder Head Bolts:
(21.7ft.lb) or (3.0kgf.m) 90?

1997 Nissan/Datsun Truck Pickup 2.4L SFI 4cyl

The Main Bearing Cap Torque:
38 Foot pounds (Final torque)

The Rod Bearing Cap Torque:
Torque sequence:
Step 1: Torque to 10-12 Ft/Lbs
Step 2: Torque to 28-33 Ft/Lbs

Hope help with this (remember rated this post). TY for using Fixya.

ft lbs

Main Bearing Cap Bolts 75-85 56-62
Connecting Rod Cap Nuts 31-39 23-28

2002 2.0L Duratech.

Don't have 2004 2.3L

• NOTE: Use new connecting rod bearing cap bolts.
  NOTE: Do not fully tighten the connecting rod bearing cap bolts at this stage.
  Install the bearing caps.

• Rotate the crankshaft through 180 degrees and insert pistons 2 and 3.

• Position the corresponding bearing shells, clean and free of oil, into the connecting rod and the connecting rod bearing cap.

• Coat the inner side of the bearing shells with engine oil.

1. NOTE: The crankshaft must rotate freely, if necessary check and adjust the bearing clearances.
   Tighten the main bearing and connecting rod bearing bolts.
   1. Tighten the main bearing bolts in two stages.
      • Stage 1: 25 Nm.
      • Stage 2: 60 degrees.
   1. Tighten the connecting rod bearing bolts in two stages.
      • Stage 1: 35 Nm.
      • Stage 2: 90 degrees.

Inner main bearing cap bolts:
Torque to 15 ft-lbs, then rotate an additional 1/4 turn

Outer main (windage tray) bearing cap bolts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn

Main bearing cap cross bolts:
Torque to 250 in-lbs or 20.83 ft-lbs

Connecting road bearing cap nuts:
Torque to 20 ft-lbs, then rotate an additional 1/4 turn

Main Bearing Cap Torque-42 Ft. Lbs.
Head Bolts Step 1-33 Ft. Lbs. Step 2- Additional 90 Degrees
Rod Bearing Nuts-29 Ft. Lbs.

Hope this helps