Actros V6. What is the torque range of bolts?

Question edited for clarity.
Question moved to model category.

All here for the three engine types

https://www.autozone.com/diy/repair-guides/nissan-frontier-xterra-1998-05-torque-specifications-repair-guide-p-0996b43f8037fa5c

https://www.google.com/search?q=2004+Nissan+Xterra.+cylinder+head+bolt+sequence+and+torque+specs

..

It is all here complete with pictures and diagrams. A Service Manual of your own is a great investment as stated by our Pro Tech Larry Ng.

https://www.google.com/search?q=2008+chrysler+300+touring+3.5+V6+head+camshaft+bolt+torque+specs

..

The rod bearing cap bolt torque specifications for the 3.0L V6 engine in a 2000 Ford Ranger XLT 4x4 with a manual transmission are as follows:

• Step 1: Tighten the bolts to 15 foot-pounds of torque.
• Step 2: Tighten the bolts to 30 foot-pounds of torque.
• Step 3: Tighten the bolts an additional 90 degrees (1/4 turn) using a torque angle gauge.

It's important to follow the torque specifications and sequence in the manufacturer's service manual to ensure proper tightening and prevent damage to the engine.

limited info generic answer if looking for all specs then buy a repair manual multi sites online can download or hardcopy -

Yes, all oil pans need gaskets. The torque is 18 ft lbs. PDF file

Oil Pan Replacement - ChevroletForum

https://chevroletforum.com > forum > equinox-23
PDF
2005 Chevrolet EQUINOX. Submodel: LT ' Engine Type: V6 ' Liters: 3.4. Fuel Delivery: FI ' Fuel: GAS. Oil Pan Replacement. Tools Required. J 39505 Torque ...


Do you need to torque oil pan bolts?
Engine oil pan bolts range in torque from seven foot-pounds to 22 ft-lb or more for large engines with heavier pans and bolts. Once you've torqued the bolts and filled the engine with oil, you should run the engine for five minutes to bring it up to normal operating temperature.

Videos and more info

https://www.google.com/search?q=2012+chevy+equinox+oil+pan+bolts+torque

..

Install the cylinder heads. Use new gaskets and tighten the bolts, in sequence, as follows:

1. Step 1: Bolts 1-8 to 20 ft. lbs. (27 Nm)
2. Step 2: Bolts 1-10 verify torque without loosening
3. Step 3: Bolts 9-12 to 10 ft. lbs. (14 Nm)
4. Step 4: Bolts 1-8 plus 1 / 4 (90 degree) turn
5. Step 5: Bolts 9-12 to 19 ft. lbs. (26 Nm)

go google --type in torque settings for chrysler v6 2.7 engine and there will be pages to help you.

Main bearing cap bolts there is a outer cap bolt that are torqued to 20 ft lbs + 1/4 turn. Then there a inner cap bolt that are torqued to 15 ft lbs + 1/4 turn. Con rod bolts are torqued 20 ft lbs +1/4 turn

Torque Specifications for Ford 4.2L-256ci-V6
These bolts are torque and turn procedure!
STEP 1: 14 FtLbs STEP 2: 29 FtLbs STEP 3: 36 FtLbs STEP 4: LONG Bolts Loosen 3 Turns - re-torque to 33FtLbs STEP 4: SHORT Bolts Loosen 3 Turns - re-torque to 19FtLbs STEP 5: ALL Bolts +180deg turn

My friend is a part time mechanic he gets his solutions from www.reliable-store.com
he gets from their every single detailed info, instructions etc. on all vehicles, and manuals like service, repairs, parts, owner's, operations, maintenance etc.
U can get help from there
there is a girl at chat she can help you