Is it at all possible to change the language from spanish to english on the ford focus car radio 6000cd

If the language on the dash display of your 2010 Nissan Murano switches back to Spanish after the car restarts, it is possible that the language preference for the display is set to Spanish in the vehicle's settings. In order to change the language for the dash display to English, you will need to access the vehicle's settings and adjust the language preference accordingly.
Here are the steps you can take to change the language on the dash display of your 2010 Nissan Murano:

1. Press the "Menu" button on the dashboard to access the main menu.
2. Use the arrow buttons on the dashboard or the steering wheel controls to navigate to the "Settings" menu.
3. Navigate to the "Language" option and select it.
4. Use the arrow buttons or steering wheel controls to select the desired language for the dash display. In this case, you will want to select "English."
5. Once you have selected the desired language, press the "OK" button to confirm the change.
6. Exit the menu and restart the car to see if the language change has been applied to the dash display.

It is important to note that the specific steps and menu options may vary depending on the specific model and year of your Nissan Murano. If you are having difficulty changing the language on the dash display, it may be helpful to refer to the owner's manual or contact a Nissan dealership for assistance.

I'm assuming you're referring to the Bluetooth settings of the vehicle. Here's how to change language settings:1. Turn the vehicle's ignition on (no need to start engine) and turn the radio on with the volume at an audible level.

2. Press and hold the TALK switch until the Radio displays the message "Please Wait". The Hyundai Bluetooth system will reply in the currently used language that it is changing to the next language.

Note: The languages cycles between English, Canadian French, US Spanish, and back to English.

3. When complete, the radio display switches back to the radio.

4. Repeat steps 2 and 3 for the next language selection.

Found this in Note Owners Manual, hope it helps.

Language set-up mode
In order to enter the language set-up mode proceed
as follows:
1) Make sure the audio unit is switched off.
2) Press and hold buttons 1 and 4 simultaneously.
3) Press the power button and the radio will switch on.
4) Release all the buttons and the display will show
LANGUAGE.
5) Press the << or >> button and the language
setting display will change as follows:
ENGLISH ? FRENCH ? GERMAN ? ITALIAN
?DUTCH?SPANISH?POLISH?ENGLISH
Once the language has been set, switch off and
switch on again the audio unit by pressing the power
button.

You will need a clip tool or dealer can change language will take 5 minutes

get the code from the dealer .but may be asked to prove the car is your first.

try 1606

try 1156 hope this helps....if it does not work do not try again as this might lock your radio for good, try at own risk..hope this helps

hi your code is 7278 hope this helps

Hi Geof

Your radio code number should read: 5796.

I trust this will do the job.

I have no other code for your model.

Please let me know if this works.

Bye Ray

your radio code is 9053