What are the torque spes for isuzu 4jg2 diesel engine cylinder head bolts?

https://www.google.com/search?q=2012+chevrolet+captiva+2.2+VCDi+diesel+cylinder+head+torque+specs

https://www.google.com/search?q=2012+chevrolet+captiva+2.2+VCDi+diesel+big+end+torque+specs

Not too much information on the 2.2 diesel. A service manual is the best idea.

..

A better search would be by 'year make model diesel'.

https://www.google.com/search?q=Isuzu+3kr2+diesel+cylinder+head+bolt+torque

..

Hey Carl,
get one of these. it has a lot of info you need..

https://www.emanualonline.com/Other/ISUZU-4BG1-4BG1T-6BG1-6BG1T-Diesel-Engine-Workshop-Manual.html?currency=USD&gclid=EAIaIQobChMIur-Oiaf71QIVkEsNCh2MBwvNEAYYASABEgKVXfD_BwE

Hey Carl..
get one of these,it has info you need...
ISUZU 4BG1 4BG1T 6BG1 6BG1T Diesel Engine Workshop Manual

all heads are staged down, RTM? read the FSM book ?
my guess you lost it or dont want to pay read it,
no year stated the books are issue dby YEAR
and country!
and then indexed by ENGINE
strike three. you are out, sorry..... (your in good company)
1000s of post like this, and still no one guessing,
i wonder why.?
hark 14 engines.

2.3 L 4ZD1 I4
2.4 L C24SE I4 (GM, Aus)
2.4 L C24NE I4 (Euro)
2.6 L 4ZE1 I4
3.1 L LG6 V6 (GM)
3.2 L 6VD1/6VD1W V6
2.5 L 4JA1 diesel I4 (Cameo, TH)
2.8 L 4JB1-T turbo diesel I4
3.0 L 4JH1-T turbo diesel I4
3.1 L 4JG2 turbo diesel I4
2.2 L X22SE I4 (gasoline) gen2 begin...
2.2 L Z22XE I4 (gasoline)
2.2 L X22DTH I4 (diesel)
3.2 L 6VD1 V6 (gasoline)
3.5 L 6VE1W V6 (gasoline)

What are the cylinder head torque settings for a KIA K2700

www.answers.com > ... > Categories > Cars & Vehicles > Asian Cars > Kia
What is the torque specification for the cylinder head on a 2002 Kia Sportage? ... the correct torque for cylinder head bolt of kia pregio 2.7 diesel is 130-135ft-lbs. ... Thehead bolt torque settings, on your Kia 2.7 diesel engine, is 70 pounds per ...

1998 Isuzu Truck Rodeo 2WD 2.2L MFI DOHC 4cyl

The Head Bolt Torque

Torque sequence ----------------- front ' 7 3 1 5 9 ' of ' ' engine ' 8 4 2 6 10 ' ----------------- Step 1: torque bolts in sequence to 18 Ft/Lbs Step 2: turn bolts in sequence an additional 90-degrees Step 3: turn bolts in sequence an additional 90-degrees Step 4: turn bolts in sequence an additional 90-degrees recheck final torque in sequence

1998 Isuzu Truck Rodeo 2WD 3.2L MFI DOHC 6cyl

The Head Bolt Torque

Torque sequence -------------- front ' 6 1 3 7 ' of ' ' engine ' 5 2 4 8 ' -------------- Step 1: torque to 20 Ft/Lbs Step 2: torque to 47 Ft/Lbs recheck final torque in sequence

The torque settings for the cylinder head on a 2003 Ford Ranger 2.5 turbo diesel WLT engine are as follows:

• Main cap bolts: 70 Nm (52 ft-lbs)
• Head bolts: 65 Nm (48 ft-lbs)
• Rocker arm shaft nuts: 25 Nm (18 ft-lbs)

It is important to note that these torque values are for the cylinder head bolts and main cap bolts only. Other fasteners on the engine, such as the oil pan bolts, may have different torque requirements.
It is also important to use a torque wrench and follow the proper tightening sequence when installing the cylinder head. Consult the service manual for your vehicle or a repair manual for the specific tightening sequence and additional torque specifications.
I hope this information is helpful. If you have any further questions or need additional assistance, don't hesitate to ask.

1996 Isuzu Truck Hombre 2.2L SFI 4cyl

Fig.: Cylinder head bolt torque sequence-2.2L engine

Apply a coating of 1052080 or equivalent sealer to the cylinder head bolt threads. Install the cylinder head bolts (within 15 minutes of sealer application), then tighten them in the proper sequence first to a torque of 46 ft. lbs. (63 Nm) for long bolts or to 43 ft. lbs. (58 Nm) for short bolts and then tighten all bolts an additional 90 degree turn using a torque angle meter.

Hope this helps (remember to rate this answer).