How do i replace the power steering pump on a Pontiac g6 2009 2.4l

Question 1

0helpful

1answer

How do I replace the power steering pump on my 2006 Pontiac Grand Prix GXP?

All of the 3.8 V6's use the same P.S. pump so the video link is good to go for your application. How to Replace Power Steering Pump GM 3800

Dec 14, 2016 • Pontiac Cars & Trucks

0helpful

1answer

Video of replacing power steering pump 2000 Pontiac montanspa

Pontiac Grand Am/ Olds Alero 3.4 liter powersteering pump ...

? 16:26
https://www.youtube.com/watch?v=fhOaJUAgPTA
Jan 6, 2014 - Uploaded by JoeTheAutoGuy
this is a video on how to replace a power-steering pump on the Gm 3.4 ... My 2000 Olds Alero (2.4) power steering pump itself is fine, but the ...

How to Replace Power Steering Pump GM 3800 - YouTube

? 19:45
https://www.youtube.com/watch?v=-T8Kek90qAA
Sep 28, 2014 - Uploaded by Rich Rodgers
How to replace the power steering put on General Motor 3800 Engine. ... Sign in to add this video to a playlist. ... Power Steering Pump Pulley Removal and Installation ACDelco - Duration: 6:25. by MyPartsGarage 136,263 views ... How to replace a power steering rack and pinion on a 2005 Pontiac Grand ...

How to Install the Power Steering Pump - AutoZone Car ...

? 6:27
https://www.youtube.com/watch?v=PMX-dBhgwlo
Apr 19, 2012 - Uploaded by AutoZone
How to Install the Power Steering Pump - AutoZone Car Care ...Power Steering Pump Replacement 2000-2006 Chevrolet Tahoe, Suburban, ...

How to replace your power steering pump - YouTube

Dec 28, 2015 • Pontiac Cars & Trucks

1helpful

1answer

Power steering pump replacement 2002 pontiac montana

Remove the drive belt, remove the 3 mounting bolts by using a socket ththrough the holes in the drive pulley. Remove the upper intake to give you room, slide off the rubber return hose, remove the pressure line and lift out the pump. Just reverse the process to instill the new pump. And fill with the proper fluid.

Jan 09, 2013 • 2002 Pontiac Montana

0helpful

2answers

On my wifes 99 chrysler LHS the steering turns very hard left and normal right have replaced the pump and still the same.

racket pion stiring is out replace it

Nov 23, 2012 • Cars & Trucks

0helpful

1answer

1993 nissan nx coupepower steering

In relation to these problem there are few solved help links,i suggest you to go through the list and click the required link:-----

Power Steering going out? http://schematicsdiagram.blogspot.in/2012/04/power-steering-going-out.html

---------------
How to Replace power steering pump on Chevy silverado 2500 HD? http://technoanswers.blogspot.in/2012/02/how-to-replace-power-steering-pump-on.html
--------------- How to replace Power steering rack and pinion gear on Chevy Silverado 2500 HD? http://technoanswers.blogspot.in/2012/02/how-to-replace-power-steering-rack-and.html
------------- Power Recirculating Ball Steering Gear removal on Chevy silverado 2500 HD? http://technoanswers.blogspot.in/2012/02/power-recirculating-ball-steering-gear.html
----------- Chevy Silverado 2500 HD steering wheel replacing Procedure? http://technoanswers.blogspot.in/2012/02/chevy-silverado-2500-hd-steering-wheel.html
----------- Steering Wheel Locked? http://schematicsdiagram.blogspot.com/2011/12/steering-wheel-locked.html

---------------
How to Remove Power steering Pressure Hose on Dodge Stratus http://schematicsdiagram.blogspot.com/2011/12/how-to-remove-power-steering-pressure.html

------------
How to replace power steering pump on Mitsubishi Diamante?

http://howtobyme.blogspot.com/2012/01/how-to-replace-power-steering-pump-on.html

---------------
How to bleed power steering pump on Toyota? http://repairhelpcenter.blogspot.in/2012/02/how-to-bleed-power-steering-pump-on.html

---------------

----------How to replace power steering pump on Toyota Land cruiser?

http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-power-steering-pump-on.html

-----------
Steering service light ON GMC Sierra Denali?

http://technoanswers.blogspot.in/2012/02/steering-service-light-on-gmc-sierra.html

---------
Steering service light came on 2004 Pontiac Grand Prix

http://technoanswers.blogspot.in/2012/02/on-one-my-pontiac-grand-prix-relatred.html

----------
Check power steering message on Toyota?

http://schematicsdiagram.blogspot.in/2012/02/check-power-steering-message-on-toyota.html

-------
How to remove power steering pulley on 2002 Ford Taurus? http://repairhelpcenter.blogspot.in/2012/03/how-to-remove-power-steering-pulley-on.html
---------1992 Ford Aerostar Power steering and Alternator belt routing diagram? http://carbeltrouting.blogspot.com/2011/12/1992-ford-aerostar-power-steering-and.html

----------------
How to replace Power Steering Pump on Acura Car Models?

Also bleeding:

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-power-steering-pump-on.html

--------------

How to replace Steering Linkage on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-steering-linkage-on.html

---------------
How to replace power steering pressure hose on mustang? http://technoanswers.blogspot.in/2012/02/how-to-replace-power-steering-pressure.html

-------------
STEERING SQUEAKS http://alltypesofpartsreplacing.blogspot.com/2012/10/steering-squeaks.html
----------- Steering Column Diagram For 1990 Jeep Wrangler http://schematicsdiagram.blogspot.in/2012/07/steering-column-diagram-for-1990-jeep.html
------------- How to replace Steering Wheel on Acura Car Models?

http://repairhelpcenter.blogspot.com/2011/11/how-to-replace-steering-wheel-on-acura.html

------------
How to replace Power Steering Pump on 1999 Acura TL?

http://howtobyme.blogspot.com/2011/11/how-to-replace-power-steering-pump-on.html

-------------

These details will help.

Thanks.

Nov 23, 2012 • Cars & Trucks

1helpful

1answer

My uncle replaced the power steering pump in my 1998 Pontiac Grand Prix but I am still having a whining noise. What is the proper way to bleed the pump of air for a Grand Prix?

the power steering pump, you need to bleed out the rack, this is done by filling the power steering system then turning the wheel from left to right in quick repitions.

Apr 18, 2011 • 1998 Pontiac Grand Prix

4helpful

2answers

I need to find out how to remove the power steering pump on a 2006 pontiac grand prix 3.8L

Power Steering Pump Replacement
Removal Procedure
1. Remove the accessory drive belt.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Disconnect the power steering pressure hose from the power steering pump.
5. Disconnect the power steering return hose from the power steering pump.
6. Disconnect the harness connector (4) from the power steering pump (1).
7. Remove the power steering mounting bolts from the power steering pump.
8. Remove the power steering pump from the engine.
9. Remove the power steering pump pulley from the power steering pump.
10. Remove the power steering pump reservoir from the power steering pump.
Installation Procedure
1. Install the power steering pump reservoir to the power steering pump.
2. Install the power steering pump pulley to the power steering pump.
3. Position the power steering pump to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump mounting bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
5. Connect the power steering pressure hose to the power steering pump.
6. Connect the power steering return hose to the power steering pump.
7. Install the harness connector (1) to the power steering pump (4).
8. Install the accessory drive belt.
9. Fill the power steering system with fluid.
10. Bleed the power steering system.
11. Operate the power steering system and inspect for power steering system leaks.

*This originally came from abauto

Mar 24, 2011 • 2006 Pontiac Grand Prix

2helpful

1answer

Power steering not working tried adding power steering fluid didn't work.

The Pontiac power steering pump run off a shaft driven and not belt driven. This means that when the steering system is stressed instead of the belt slipping it puts a lot of stress on that shaft and could cause that to break. If nothing seems to effect the power steering I would have to guess that this is what happened and the power steering pump will have to be replaced.

Sep 21, 2010 • 2000 Pontiac Grand Am GT

0helpful

1answer

Replace power steering pump on 93 pontiac trans am

you can buy a Haynes manual from Advanced Auto, Autozone. Its maybe $10. They have in-depth directions and pictures. Plus it will show you how to do lots of various other repairs. Happy Motoring!

Nov 04, 2009 • 1993 Pontiac Firebird

33helpful

2answers

How to replace power steering pump

2004 Pontiac Grand Prix V6-3.8L VIN 2

Power Steering Pump: Service and Repair
Power Steering Pump Replacement
NOTE: The content of this article / image reflects the changes called out by TSB: 05-02-32-004.

Power Steering Pump Replacement
Removal Procedure
1. Remove the accessory drive belt.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the tire and wheel assembly.
4. Disconnect the power steering pressure hose from the power steering pump.
5. Disconnect the power steering return hose from the power steering pump.
6. Disconnect the harness connector (4) from the power steering pump (1).
7. Remove the power steering mounting bolts from the power steering pump.
8. Remove the power steering pump from the engine.
9. Remove the power steering pump pulley from the power steering pump.
10. Remove the power steering pump reservoir from the power steering pump.
Installation Procedure
1. Install the power steering pump reservoir to the power steering pump.
2. Install the power steering pump pulley to the power steering pump.
3. Position the power steering pump to the engine.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump mounting bolts.
Tighten the bolts to 25 Nm (18 ft. lbs.).
5. Connect the power steering pressure hose to the power steering pump.
6. Connect the power steering return hose to the power steering pump.
7. Install the harness connector (1) to the power steering pump (4).
8. Install the accessory drive belt.
9. Fill the power steering system with fluid.
10. Bleed the power steering system.
11. Operate the power steering system and inspect for power steering system leaks.

Sep 07, 2009 • 2004 Pontiac Grand Prix

Question 2

L Pfaff

Pontiac Master 11,573 Answers
Posted on Mar 23, 2016

L Pfaff

Pontiac Master

Joined: Jan 05, 2011

Answers

11573

Questions

0

Helped

3586448

Points

181713

How do i replace the power steering pump Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to Install the Power Steering Pump AutoZone Car Care
How to replace your power steering pump
http://repair.chiltondiy.com/Pontiac/G6/GT/Repair-Manual-Online
http://www.repairservicemanuals.com/Pontiac

youtube.com

How to replace your power steering pump

youtube.com

How to Install the Power Steering Pump AutoZone Car Care

Answer 2 · 9/25/2008 12:00:00 AM

Anonymous

11 Answers
Posted on Sep 25, 2008

SOURCE: Power steering very hard

lift up the front of the car and see if you can steer the car on the tires. your [problem may be what mine was and the u joint on the tilt wheel is bad not the power steering at all. Hope this helps.

Anonymous

212 Answers
Posted on Feb 01, 2010

SOURCE: 1998 Pontiac grand prix gt leaking power steering

SEALS IN PUMP MABY GOING

choprboz5

197 Answers
Posted on May 13, 2010

SOURCE: How do you replace a power steering pump in a 1995

It's pretty simple. Just a couple hand tools are all you need. Take the tension off the belt and remove the belt from the pully. Put a drain pan under the pump and remove the lines from the pump. Then remove the bolts holding the pump on. Install in the reverse order.

Jose Cada

3530 Answers
Posted on Dec 06, 2010

SOURCE: how to replace the power steering pump on a 2001

Welcome to Fixya

here's the procedure on how to replace water pump of your car

1 Turn the belt tensioner pulley counterclockwise on the 3.4L modeal. Use a breaker bar and a socket to rotate the center bolt on the tensioner pulley. If you have a 3.5L engine model, turn the pulley clockwise.

2 Slide the drive belt off the steering pump pulley.

3 Detach the black ground cable from the battery using a wrench.

4 Position a drain pan under the car in the direction of the steering pump hoses.

5 Move any wire brackets near the steering pump out of the way using a wrench or ratchet and socket, if necessary.

6 Disconnect the return hose from the power steering pump by loosening the clamp at the steering pump using a ratchet and socket. Then pull the hose off the pump and let the steering fluid drain into the pan.

7 Detach the pressure hose from the steering pump by unscrewing the retaining nut at the pump using a tube wrench. Let the steering fluid drain on the pan.

8 Unscrew the steering-pump mounting bolts using a ratchet, ratchet extension and socket.

9 Lift the power steering pump off the engine compartment.

Install the New Steering Pump

1 Position the new steering pump in place and start the mounting bolts by hand. Then tighten the bolts using the ratchet, ratchet extension and socket.

2 Attach the pressure hose to the steering pump by starting the retaining nut by hand. Then tighten the nut using the tube wrench.

3 Connect the return hose to the steering pump. Then tighten the clamp using the ratchet and socket.

4 Reinstall any wire brackets you had to remove using a wrench or ratchet and socket.

5 Connect the black ground cable to the battery using a wrench.

6 Install the drive belt by turning the tensioner pulley counterclockwise using the breaker bar and socket. Then slide the belt over the steering pump pulley. If you have the Aztek 3.5L engine, turn the tensioner pulley clockwise.

7 Reinstall any wire brackets you had to remove form near the steering pump using the wrench or ratchet and socket.

8 Connect the black, ground cable to the battery using a wrench.

Bleed the Power Steering System

1 Refill the steering fluid reservoir with new steering fluid. Make sure the level reaches the Full Cold mark on the reservoir.

2 Raise the front of the vehicle using a floor jack until the front tires are off the ground. Then support the car on 2 jack stands.

3 Turn the ignition key to the On position but do not start the engine.

4 Turn the steering wheel fully from left to right 15 times.

5 Check the fluid level in the steering reservoir and add if necessary.

6 Lower the vehicle and start the engine. Turn the steering wheel and listen for steering noises. If you hear noises while turning the steering wheel, repeat steps 2 through 5 of the bleeding procedure to get rid of the air in the steering system. Turn off the engine.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

Anonymous

299 Answers
Posted on Apr 22, 2011

SOURCE: how to replace power steering

need tool to pull off pulley first

Answer 3 · 9/25/2008 12:00:00 AM

Anonymous

11 Answers
Posted on Sep 25, 2008

SOURCE: Power steering very hard

lift up the front of the car and see if you can steer the car on the tires. your [problem may be what mine was and the u joint on the tilt wheel is bad not the power steering at all. Hope this helps.

Answer 4 · 2/1/2010 12:00:00 AM

Anonymous

212 Answers
Posted on Feb 01, 2010

SOURCE: 1998 Pontiac grand prix gt leaking power steering

SEALS IN PUMP MABY GOING

Answer 5 · 5/13/2010 12:00:00 AM

choprboz5

197 Answers
Posted on May 13, 2010

SOURCE: How do you replace a power steering pump in a 1995

It's pretty simple. Just a couple hand tools are all you need. Take the tension off the belt and remove the belt from the pully. Put a drain pan under the pump and remove the lines from the pump. Then remove the bolts holding the pump on. Install in the reverse order.

Answer 6 · 12/6/2010 12:00:00 AM

Jose Cada

3530 Answers
Posted on Dec 06, 2010