Anti polotion fault - 2006 Peugeot 407 1.6

Fix the Theft fault fix the no start.

A sensor dirty or faulty most likely, usually is with C2's, lambda sensor.

engine ecu has fault codes to be read

several parts and sensors cover anti polution problems

Disconnect batt a min....see if it clears. May need it hookd to a scanner to tell issue. Emmisions can effect motor and computr

anti pollution fault with fault codes poo87 poo93 i changed fuel filter, so far all ok.

my 2008 308 shows anti pollution fault,what do i do now.? any help please

Most anti-theft systems disable the engine electronically try using a code reader this might give you the fault code which prevents your engine from running

How do you know the anti-theft is at fault here? Have you scanned the system or had it scanned? If not the dealer needs to scan it for fault codes to see what the cause of theno start is.

replace the complete clutch assembly which includes the disk, pressure plate and the release bearings, some of them also have a polot bearing / bushing, replace it while you are at it make sure that the fly wheel is nto overheated or scored if it is replace the fly wheel or atleast machine the fly wheel in a machine shop, and replace the rear main engine oil seal. when every thing is out and dont forget to rate me please