At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: My honda accord 2008-v6 has code po 847.please tell...
PO 847 relates to transmission fluid pressure, could be several faults . fluid level, transmission oil filter, oil needs changing, converter fault oil over heating ECT.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
po139 is a code for o2 sensor slow response bank 1 sensor2 which tells me you have a v6 engine and this sensor is located after the catalytic converter on the side of the engine that the #1 cylinder is on.
Soft reset disconneting the negative battery cable few minutes; if the code come back again, its possible that you have some problem with the sensor, wires or harnesses connections.
Keep in mind that sometimes will need OBD scanner tool to reset or delete all stored codes.
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.
Please read the explanation below. This is a transmission issue.
P0700 HONDA Description The Transmission Control Module (TCM) monitors the malfunction of sensors and actuators relating to transmission control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transmission controls.
Hi and welcome to FixYa!
P0135 (heater circuit malfunction) primary o2. You will need to replace the 02 sensor to resolve the issue.
Hope this helps and thank you for using FixYa! Have a good one!
call autozone or orielleys or advance and tell them that code nd they will tell you what that code means, if u got the code from a code reader that u plug into the car thru and obd 2 reader then they can tell u
Code PO-141: Downstream Oxygen sensor, heater circuit malfunction.
Code PO-457: Evaporative emission (EVAP) system, leak detected or fuel cap loose or missing.
Sometimes you can get a PO-457 if you overfill your gas tank.
Hope this gets you started on a fix.
×