At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
This means something is shorting. Some water must have got in and shorted some wires. Alternatively follow the wires and check for continuity as well as shorts.This means something is shorting. Some water must have got in and shorted some wires. Alternatively follow the wires and check for continuity as well as shorts.
You can't post conmments that contain an email address.
I did that and everytime I change out the fuse and turn the headlights on the fuse blows instantlyI did that and everytime I change out the fuse and turn the headlights on the fuse blows instantly
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
More then likely the lighting control module is bad , But testing would be a good idea. Look at a wiring diagram at http://www.bbbind.com/free_tsb.html .Do you know how to test solid state electronic componets . Testing basic automotive electrical circuits ? The lighting control module supply's power to turn on the lights. Your best bet , take your vehicle to a ford dealer .
First check fuse for brake light with test light if fuse is good test brake light switch under dash with test light if you dont understand how to do the above contact me at [email protected] title the message crown vic problem
you can get a A/C Delete kit for a Ford 4.6 liter. the 4.6 v-8 accessory drive system is all the same. You may also be able to run a line of string around the pullys, take it to your local auto parts store and they can match it up. I recomend the kit,
i have ran into 2 issues in these vehicles---if it binds while sitting still also, check the steering shaft, i have found the u-joints in the shaft tighten up and binds dangerously tight---if they are free, sounds like you may have a steering box issue or restriction in a line---hope this was helpful!!
This means something is shorting. Some water must have got in and shorted some wires. Alternatively follow the wires and check for continuity as well as shorts.
×