Why dont my passenger side door have any power or show the door is open

if not working from drivers or passenger side you need to remove passenger side door skin, with a test light check for power at the motor? If you have power at the motor and the motor is grounded you need a motor. If you dont have power and ground then you need a switch. This can be tricky sometimes the passenger switch is good and the problem is in the drivers side switch which is the main controller.

I agree with the body control module. They are troublesome on Auroras!

faulty master switch ..replace

looks like car has other issues as well.. but try that first

check the window lock switch on the drivers panel, if its gone bad, the other windows will not work,,

CHECK POWER WINDOWS 20 AMP CIRCUIT BREAKER.

Hello. The power windows each need a new window motor assembly which includes a new track system. The advantage to the assembly is that it is very difficult to remove the motor and install a new one. the power door locks on the passenger side the most likely cause is the power door lock actuator, about a ten dollar part.

I would check the overhead buttons there are two one opens the door, and the other beside it that shows the van crossed out, disables the electric sliding door feature. try playing with that, Also remember, that vehicle must be in PARK for the electric sliding door to open. Make sure the power lock on that door is working, and check the child safety lock when you have it open by the doors catch. Hope that Helps You.

I removed all 3 switches from driver and passenger door, which is really easy with a flat head screw driver. took them completely apart, very carefully, with a small screwdriver out of a christmas cracker. put them back together again and 2 switches started working, so I put 1 in the drivers side and 1 in the passengers side so now my drivers door window opens and I lean over to open the passenger door. cool, no money spent...yet ;o)