Is there a reset for the bluetooth lists - 2009 Saab 9-3

To connect Bluetooth on an Audi A4b6 CD player (Concerts 2), you will need to follow these steps:

1. Make sure the CD player is turned on.
2. Press the "Menu" button on the CD player to access the main menu.
3. Navigate to the "Settings" menu using the arrow buttons on the CD player.
4. Select "Bluetooth Settings" from the menu.
5. Follow the prompts on the screen to enable Bluetooth on the CD player. This may involve turning on the Bluetooth function on your phone and selecting the CD player from the list of available devices.
6. Once the CD player is paired with your phone, you should be able to use the Bluetooth function to make and receive phone calls, stream music, and access other Bluetooth-enabled features.

have you made sure with nokia site that this blue tooth is compatible with your phone??

is you phone not even detecting the device?

Hi
Normally when you try and connect or pair your device it normally ask for code. mostly its 0000 or 1234

thanks

In order to connect your tracfone with the 2016 Honda CR-V via Bluetooth, then just follow the list of directions as given below,
1.Press and hold DISP to go to the Settings screen.
2.Select Phone Settings.
3.Select Bluetooth Device List (if no phone has been paired) or Connect Phone (if pairing an additional phone).
4.Select Add Bluetooth Device.
5.Make sure your phone is in discovery mode and select OK.
6.HFL searches for your phone. Select your phone when it appears on the list.
If your phone does not appear: Select Phone Not Found and search for HandsFreeLink from your phone.
7.HFL gives you a six-digit code. Compare it to the code that appears on your phone. Connect to HFL from your phone.
8.The system asks if you want to enable Phone Synchronization. Select On to automatically import contacts and call history

For more clarification, here I have attached the video with my answer which will help you out to Set Up Bluetooth connection between your headset and tracfone in 2016 Honda CRV, take a look

Hi Douglas.

1. Switch on BlueTooth on your keyboard.
2. Enable BlueTooth on your iPad.
3. Search for devices on your iPad.
4. Press button if available on keyboard to get discovered.
5. Select keyboard when shown in devices list.
6. Enter pairing code sometimes 0000 or 1234.
7. Use and enjoy.

Hope this helps!

Here is the Apple site instructions:
Using Bluetooth headsets and keyboards with iPad

Here is another that explains how to do it on a MAC, might give you some clues as well:
Bluetooth How to set up your Apple Wireless Keyboard

Here is a good independent site, maybe start here:
iPad How to pair connect any bluetooth keyboard

If you prefer to watch how to do it on YouTube:
How to Connect Pair Bluetooth Wireless Keyboard to your iPad

you have to go into the menu - look for settings - bluetooth and delete listed unit.

You could try the bluetooth generic passwords (0000 and 1234), these usually work with most devices.

read the manual

if you have a bluetooth phone paired to the vehicle, try deleting all bluetooth devices. Sometimes a battery reset can cause bluetooth synchronizing issues.

Bluetooth is pretty much universal, in that if you have two bluetooth devices and they are paired correctly you should have full connectivity.
If you have not purchased a phone based on the info given by VW, just try and pair a friends phone up to the car, it will do no harm.