How do i repair a p0750 error on my 1998 Mazda B3000 pickup truck with 3.0 liter engine rear wheel drive?

Interior Fuse Box Location 1998 2009 Mazda B3000 2004 Mazda B3000 SE 3 0L...

look under truck and see if anything is wrapped around drive shaft also if looks good u joints may be going bad also check the center bearing and bracket its a support hanger bearing for driveshaft

check the oil level may need a top up.

Possible for a speed sensor failing. Not sure on those trucks.

check all your fuses

If you need further help, I’m available over the phone at https://www.6ya.com/expert/michael_00678fd4800d19c5

it requires a special tool that only has two jobs,removal of power steering pulleys and installing them,you can get this at NAPA,or Autozone for $30.00

Hello there 2001 Mazda B3000 DS Cab Plus 2WD
3.0 liter OHV V-6

it's basically a stand alone relay... most times... look for a relay by itself and often round. my ford winstars flasher relay was actually located in the fuse box under the drivers side dash. it was blue and larger then the other relays so that may be a clue to you.

Robert

Please take a moment to rate this solution

the inertia fuel shut off switch is located behind right side of instrument panel , below glove box . not knowing which model truck , i checked b3000 and b2500 and b4000 , all are in the same place .

J5