SOURCE: TIMING BELT MARKS DONT MATCH AFTER ENGINE TURNED OVER
dont worry about that you will have to turn the motor over 40 to 50 time before those timing belt marks line up again if your pulley marks line up correctly thats all you have to worry about
SOURCE: diagram for the timing of a toyota hilux 2.o vvti
get a Haynes manual. @$20 at autozone. money well spend as you will get lots of use from it if you work on your vehicle
SOURCE: Toyota rav4 2004 model with
hi,i have rav4 2002 model, from 1st gear to 2nd gear its hard to move on but if motion goes on 3rd to 4th gear going smooth , maybe what the problem with my car
SOURCE: toyota celica vvti 2000
The first thing is to have the computer scanned for codes. the check engine light should also be on with the engine idle too high.Scanning for codes is the best first step in finding the problem.
this could be caused by a vacuum leak or bad throtle postion sensor or mass air flow sensor and more.Go to an auto zone or other auto parts store ,they will scan the codes and give you a print out of the codes. get me the codes and i will try to help you solve this problem.
SOURCE: Timing Chain Marks Toyota V6 4 Liter
Before you remove any thing place the engine on no 1 firing on the timing mark on the bottom pulley. when removing any thing after that do not turn the engine or the cam shaft and every thing will stay in order.; You will probably see the position of the marks in this position.
2,121 views
Usually answered in minutes!
×