Cylinder head cover sub-assy x Cylinder head sub-assy 9 92 80 in.?lbf
Cylinder head sub-assy x Cylinder block sub-assy 1st - 39 398 29
SOURCE: cylinder head torque settings for a toyota 1493cc
If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.
SOURCE: diagram for the timing of a toyota hilux 2.o vvti
get a Haynes manual. @$20 at autozone. money well spend as you will get lots of use from it if you work on your vehicle
SOURCE: audi a6 2 ltr petrol timing marks and torque
ally head 75lbs ,timing marks i honestly cannot remember ,do it old fashioned way time it to no1 with valves closed on no1 then you can see where or what the pmarks should be ,do not use starter motor ,always crank engine by hand 360? to ensure valves clear
SOURCE: toyota celica vvti 2000
The first thing is to have the computer scanned for codes. the check engine light should also be on with the engine idle too high.Scanning for codes is the best first step in finding the problem.
this could be caused by a vacuum leak or bad throtle postion sensor or mass air flow sensor and more.Go to an auto zone or other auto parts store ,they will scan the codes and give you a print out of the codes. get me the codes and i will try to help you solve this problem.
1,072 views
Usually answered in minutes!
×