The wiring order on the firing on a 1995 Nissan Maxima V6

Dar

• 2007 Answers
• Posted on Jun 18, 2009

SOURCE: my nissan maxima will not start

Check timing belt. Shoot a timing light down at your crank. If the timing mark jumps around bad, your belt has slipped.

SOURCE: What is the spark plug gap suppose to be on a 1996

.044 inch

see here:

http://www.autozone.com/autozone/repairinfo/specifications/specificationsMain.jsp?childCatName=Spark+Plug+Gap&childCatId=23200033&categoryNValue=23299999&categoryNameForTitle=Specifications&categoryName=SPECIFICATIONS&childCategoryNameForTitle=Spark+Plug+Gap#

Hope this helps.

SOURCE: order to put wires on nissan maxima

For the 1993 Nissan Maxixa 3.0L:

Firing Order:
1-2-3-4-5-6

Cylinders:
......(back)
1.......3........5
2.......4........6
......(front)

Distributor Connections:
...(back)
............1
......6
5.................2
............3
......4
..(front)

ZJ Limited

• 17989 Answers
• Posted on Apr 01, 2010

SOURCE: need firing order and diagram

1999 Nissan Maxima GXE 3.0 liter DOHC V-6 (VQ30DE)



Hope this help.

SOURCE: How to change spark plugs on the v6 Nissan 2000

For the 3 spark plugs in front:
1. You would have to remove the plastic protective cover (this cover is silver&red w/ the words "nissan and v6 3000")
2. unplug connector and remove coil (DO NOT mix up the coils, keep the same coils on the same cylinder)
3. Remove spark plug

Rear 3 plugs: located on the rear of the intake (the black pipes atop the engine). there are 3 openings at the rear of the black intake pipes, each opening has a coil mounted.
1. Unplug coil connector and remove coil
2. remove spark plug (you'll need a long extension)
***Installation is reverse, be sure not to over tighten the plugs!! Use anti-seize compound on all the new plugs threading. Hopefully this helps!!