Do you hear the fuel pump coming on normally comes on for approx 10 sec. when you turn key on, if no pump noise fault is still in fuel system, check the fuse and wiring, check for trouble codes, check injectors, etc
links below may help trouble shoot, press the helpful button
http://www.geeksoncars.com/how_4896626_troubleshoot-pump-problems-chrysler-sebring.html
1999 Chrysler Sebring LXi V6 2 5L
How to Test the Fuel Pump Chrysler 2 0L 2 4L
Do you hear the fuel pump coming on normally comes on for approx 10 sec. when you turn key on, if no pump noise fault is still in fuel system, check the fuse and wiring, check for trouble codes, check injectors, etc
links below may help trouble shoot, press the helpful button
http://www.geeksoncars.com/how_4896626_t...
1999 Chrysler Sebring LXi V6 2 5L
How to Test the Fuel Pump Chrysler 2 0L 2 4L
×
SOURCE: 2004 cavalier fuel problem?
Please call me its easier to explain on the phone, in the mean time try something easy hit the fuel pump on thebottom with a brick or rock then have someone listen to the fill neck of the tank for the two second "buzz" as soon as you turn on the ignition, has this vehicle been run way way low on fuel many times or the fuel filter neglected to been changed at the 15,000 miles interval?
call me or I can call you 253-691-6206
SOURCE: 2003 Hyundai elantra
Hi there they are known to have dramas with the pick up for the immobilizer i would be getting that checked first before spending money on something .else
SOURCE: 2001 sebring will turn over but will not start
Most Chrysler cars do have an anti-theft system that can cut out the engine.
I would call the service department, with your VIN handy, and see if yours was equipped with one, and what you need to reset it.
If that isn't the problem, your EGR valve might be bad, or the sensor for it. I've seen a lot of cars where if either the valve itself, or the sensor are malfunctioning, the car won't run properly.
I would also check your MAF and IAC, as those can cause the car to not run.
If you can, get an OBDII code scanner, and pull the codes from your car, they might give you a more specific place to look. (Most parts stores will let you take one home, you put a deposit down, and get it back when you bringthe scanner back to them)
SOURCE: 2001 ford focus will not start. The engine will
I will try to help you. You are correct about the starting fluid, if it has fire starting fluid should do something. So the problem must be either no fire to the plugs or the timing belt is broke.
Check to see if the plugs have spark. If they do not, then get with the Autoparts store and ask if your car needs a Ignition relay to run. Then ask if your car takes a rubber timing belt. If your car does not have a rubber timing belt try the Ignition relay. If you do have a rubber belt check behind the shield in front of the engine to see if the timing belt is broke.
The timing belt is different than the serpetine belt that drives the pulleys. Cars with rubber timing belts have both belts. Should your timing belt be broken it is not an expensive repair. But you will need to details on replacement of that part.
Testimonial: "I appreciate your help and will be checking your sugestion very soon."
417 views
Usually answered in minutes!
×