Chevy Silverado and GMC Sierra Fuel Pump/Fuel System - Edmunds.com
forums.edmunds.com > Chevrolet > Chevrolet Silverado 1500
Mar 20, 2011 - 30 posts - 19 authors
Learn more about Chevrolet Silverado 1500 at the Edmunds.com Car Forums! ... problem with my 2000 GMC Sierra 1500 4.8LTR V-8 you described in your post. .... Ihave a 2008 gmc sierra last 8 vin 8Z160870 4WD pickup was ... removed power and truck died. have no power at 20amp pump fuse, key on ...
Chevy Silverado and GMC Sierra Starting Problems ...
30 posts
Apr 18, 2013
8 - Car Forums at Edmunds.com
30 posts
Nov 7, 2011
9 - Edmunds.com
30 posts
Oct 28, 2008
More results from forums.edmunds.com
SilveradoSierra.com • Cranks but wont start. Fuel problem ...
SOURCE: 1990 GMC Sierra 4x4 1500
the connections near the front axle that activate the motor to engage the system aren't melted? That's a comon problem for that body style. If there good, sounds like it could be that motor itself. To figure out if it's you motor or transfercase, jack up the rear end, have a friend inside shift into 4 wheel drive, or try to, and put it in gear and apply some gas. If the front driveshaft is turning then it's something with the front end. If not, farther back in the system.
SOURCE: removal of power steering pump on 1998 GMC Sierra 1500
you need a power steering pump puller the rest is simple any trouble let me know
SOURCE: fuel pump fuse located on 1997 gmc sierra
The fuse is actually a Relay Switch and its located in the Fuse Relay Center on the driverside of the engine compartment. The Black Box is labled Fuse Relay Center, the diagram on the cap displays which Relay is the Fuel Pump relay...the Relay switch is usually $8-$15 depending on where you shop
SOURCE: LOW OIL PRESSURE ON 2007 GMC SIERRA 1500. CHANGED
have it tested using a manual gage if still low then main baring ore most likely bad that would mean a over hall if is really low and bearings bad should be making rattle noise when started up first few seconds
Testimonial: "thanks alot.truck is not making a rattling noise.we did check it with a manual gauge.it read about 10 at idol. press. gets better as you incr speed"
1,900 views
Usually answered in minutes!
×