Very cold outside, we used the hatchback all day; but now we can't get it to close. We did try using the button in the glove box - still won't close

Maybe the child safety locks are on or alot of the newer vehicles have an info button located around the steering wheel that allows you to change lighting security locking

How to Use the Power Liftgate on 2013 Toyota RAV4

www.autoevolution.com/.../how-to-use-the-power-liftgate-on-2013-toyo...

Nov 13, 2013 - First, there is no more spare tire attached to the rear door and second...... How to Use the Power Liftgate on 2013 Toyota RAV4 ... angle, press one of the two buttons again; Press and hold one of the buttons to close the hatch.

2013 Toyota Rav4 Power liftgate not working when pressing ...

? 0:46
https://www.youtube.com/watch?v=X-VjbRatwY4
Apr 28, 2014 - Uploaded by Adam Bednarz
2013 Toyota Rav4 Power liftgate not working or opening by itself when ... operation and you then have to manually open and close the door. .... Got the car back from the 30K service and the back hatch was not working.

How do I operate my 2013 RAV4 adjustable power liftgate?

toyota.custhelp.com/.../detail/.../how-do-i-operate-my-2013-rav4-adjusta...

The adjustable power liftgate can be opened and closed using either a switch on the ...The PWR DOOR OFF switch in the glove box must be in the 'operate' ... To open the liftgate using the Smart Key, press and hold the rear liftgate ... To open the liftgate using the switch on the door itself (located below the Toyota logo and ...

XLE trunk release - Toyota RAV4 Forums - RAV4World.com

www.rav4world.com > ... > 4.4 Interior

Jul 29, 2013 - 10 posts - ‎5 authors
There is an inside emergency release for the trunk, liftgate, back door, hatch, whatever you ... This is from page 128 of the 2013 user's manual: ... Very bad experience with power rear hatch and Toyota ...
10 posts
Jan 1, 2014
Power Rear Hatch fails to close
9 posts
Sep 25, 2013
Rear hatch problems
10 posts
Jun 27, 2013
Backdoor (liftgate) won't close
3 posts
Mar 9, 2013
More results from www.rav4world.com

probably need to be using a lighter weight oil. I use 5w-30 in central Texas. If you are that far north, where oil gets cold and thickens up....

have dealer verify by dropping off for service, parking outside overnight, and then try to bring it into the service bay next morning for service.

desbloqueo de radio honda fit 2010

First thing is first, remove the lightbulb in your glovebox before you kill your battery. On the door of the glovebox, where it locks onto the piece sticking out of the glovebox, wiggle that whole piece, and see if it's loose. If it is, take a screwdriver, and tighten it. It may have just loosened itself from regular use. If it's loose, it won't lock onto the piece because it's just moving up or down when you try to slam it shut. Hopefully this works! Either that, or go to a junk yard, and get that peice out of another car. Simple fix for little money.

Most often, access to the trunk is achieved by folding the rear seat down. If not, remove the seat and you'll have access to the trunk area.
If access isn't a problem, get yourself a plastic panel removal tool set from parts store and make sure it's not cold when you remove the panels as they'll be more likely to break from being brittle from the cold. Take your time.

Your cabin filter is located behind your glove box. To remove your glove box, you will need to locate the two bolts underneath the glove box and remove them. Then open your glove box, and while holding your glove box, push inwards on the glove box stops on either side in order to allow the glove box to come out.
Once the glove box is out, you should be able to look in and see the slim access panel to your cabin filter. Just pinch the ends, and pull the panel out. Reverse for installation. Please let me know if I may further assist you, -TXTEXAN

The blend door is inside the box where the air flows from outside into the car. The air goes through the air conditioner first, then it goes to the blend door. When the door is open, the air will then go thru the heater and get hot. When the door is closed, the cold air will come out the vents. In this way, the blend door controls how much air goes thru the heater. When you are running the A/C, you want the blend door closed. If your a/c compressor is working but you are not getting cold air, the blend door may be stuck open.
My book shows your blend door is behind the glove box. It also says your door is controlled by a cable. What you should do is look behind the glove box to see what happens when you change the temperature on the panel. It should move a cable behind the glove box that turns a lever on the door. The cable should turn the lever as far as it will go. If it doesn't do that, it is either broken or needs to be adjusted. It may have slipped out of it's clamp. To adjust, loosen the clamp, turn the knob to cold, and push the door fully closed, then tighten the clamp.

Let me know if it doesn't look like what I'm saying or if you have other questions.

I would look on the dashboard for a button labled rear window or on the center console. If you have the truck manual in the glove box, go to the index and it will tell you what page to look.

try to unlock all doors with key if don't work try to wiggle key while unlocking the doors or hatchback!!!