My reverse lights dont work

Check out the videos and the images tab.

https://www.google.com/search?q=2003+chrysler+town+and+country+transmission+control+module+location

..

It can only be the ground to it, or the Reverse Light Switch on the gearbox then.

https://www.google.com/search?q=2000+chrysler+town+country+reverse+light+switch+replacement

..

Could be the bulbs, plugs, wire, or neutral safety switch

posible a fuse back up light switch mounted a the transmision case

Check out the relay, located in the fuse panel under the hood.

does it do it when its in gear or just in nuterall its probably a dodge reverse switch when its ticking over the vibration will be making the switch jump about causing the lights to come on also could be the wiring comming loose wiggle the gear stick about with the cars ignition on so all the light work and get some one to stand at the rear of the car to see if they are comming on while your wigaling if they still come on its the reverse switch hope this helps ivan

Check fuses, wires and bulbs, finally check brake switch, generally is located backside brake peddal.

please ensure you translater is working correctly ,spanish or english for me ,dont know about other experts on here though

Is it cranking? Have you checked the ignition fuse?

have you tried the brake light switch its located on the brake pedal bracket.