How do i bleed the clutch - 2005 Ford Fiesta 1.4

Question edited to put stuff in the right order.

All clutches are bled the same. Pressurised bleeders make the job very easy. Video in the link

https://www.google.com/search?q=2007+Opel+Corsa+diesel+Bakkie.+bleed+the+clutch

You can also do it the old way

Bleeding clutch! ' Vauxhall Corsa-C Forum

https://www.corsa-c.co.uk > ... > Home > General Chat
Sep. 2, 2009 - No, it's not a curse, it's a question. How do I bleed the clutch? My car is 2001 Corsa 1.2 16v SXi 3 door black 5 speed manual. SL51 CSZ.
Clutch Bleeding issue ' Vauxhall Corsa-C Forum
Oct. 27, 2015
Bleeding clutch ' Vauxhall Corsa-C Forum
Jul. 7, 2013
How do you bleed the clutch after removing break servo and ...
Oct. 15, 2013
Clutch Won't Bleed! ' Vauxhall Corsa-C Forum
Jan. 13, 2013
More results from www.corsa-c.co.uk

How to Bleed a Clutch - Autoblog

https://www.autoblog.com > 2016/04/19 > how-to-blee...
Apr. 19, 2016 - It is connected to the clutch slave cylinder through hoses. When you push the clutch pedal, brake fluid flows from the clutch master cylinder to ...
Missing: Corsa. ‎' Must include: Corsa.
..

Try bleed

1. Check the fluid level in the master cylinder. ...
2. Locate the bleed screw on the slave cylinder. ...
3. Attach the hose to the bleed screw. ...
4. Open the bleed screw on the slave cylinder. ...
5. Have a friend press the clutch pedal in and hold it. ...
6. Close the bleed screw. ...
7. Have your friend release the clutch pedal.

Bleeding Clutch by Blocking the Slave Cylinder

You will need to locate the clutch slave cylinder/concentric slave bleed screw usually visable. You will need brake fluid, bleed bottle, correct spanner to slacken off bleed screw, top up clutch fluid resevoir, fit pipe to bleed screw get someone to press down clutch as u open bleed screw watch for air and the tighten do this till no more air is visible in the pipe. Remember to keep reservoir topped up.

bleed clutch cylinder Robinny, Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Bleeding clutch
Clutch bleed how to
Nissan Altima 2007 2012 Service Manual Clutch fluid On vehicle maintenance...
Help clutch bleeding Fail

you bleed like you would the brake system. there is a bleeder screw on the slave cylinder that you bleed the system.

Clutch systems bleed just like brakes, if you have an external leak at the clutch master cylinder, then bleeding will be difficult, it should be replaced. I use a two person bleeding system, I fill the master, crack the bleeder screw open and have my 2nd push the clutch down and hold it, then I close the bleeder and tell my 2nd to release the pedal, repeat until no air is present.

This all depends if this is a hydraulic clutch or if its cable operated, you can only bleed hydraulic clutches, to bleed it you would bleed at the ******, you will see the bleeder screw on the slave cylinder that operates the clutch fork.

If there is no bleed port, you have to bleed it before installation and then bleed the last bit of air by loosening the hose connection.

you bleed a hydraulic clutch the same way you bleed a brake system and it uses brake fluid as well.you keep bleeding until there is no more air in the clutch system.there should be a bleeder screw on the clutch slave cylinder that is were you bleed the clutch from.

Hydraulic Clutch System BLEEDING The clutch system can be bled using a pressure bleeder. Follow the instructions that come with the pressure bleeder for the proper pressure bleeding procedure. The maximum line pressure while pressure bleeding must not exceed 36 psi (248 kPa). NOTE: To bleed a clutch manually requires the assistance of a second person, a section of hose that is compatible with brake fluid (preferably clear) and fits the slave cylinder bleed screw snugly and a container to catch the fluid that is bled through the system. As brake hydraulic fluid easily absorbs moisture, always use fresh fluid when bleeding a hydraulic system.

1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
2. To bleed the system perform the following:
   1. Top off the hydraulic fluid reservoir using a fluid that meets the standards of the vehicle's hydraulic system.
   2. Open the clutch slave cylinder bleed screw and press the clutch pedal to the floor and hold the pedal down.
   3. Close the clutch slave cylinder bleed screw.
   4. Release the clutch pedal.
   5. Check the hydraulic fluid level and top off as necessary.
3. Repeat the above steps until the discharged fluid is clean and no air bubbles appear during the bleeding process.