At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Which ever side you are looking to change, you will find an 8 to 10mm bolt. Once you remove that bolt located near the headlight housing, you lift up on the bar that you just took the bolt off of, then once you have the bar up, gently pull out the headlight housing starting from the inside pulling straight out, thats it. Remove the bulb, and replace in reverse order.
The headlight assembly must come out (it's part of that unit)
The assembly is removed by removing the three fasteners on top and then gently but firmly pulling the assembly straight out (forward)
You'll see the harness for your blinker in there
real interesting... there should be no relation to the "drive" and the head light. current drawn by the starter causes the lights to go out or dim. Check the headlamp relay and for corrosion on connector to lamp assemblies in the engine compartment. On back of assemblies there is a large diameter plastic retainer after you remove the wire clip. Turn counter clockwise and pull back. a wire clip should retain the bulb itself
remove headlight assembly (remove top three fasteners and pull assemble straight forward (firmly)
unhook harness
do not touch glass of replacement bulb
its probally a haligen bulb needs replaced from the inside under the hood that twists in the back of the light just half a turn the unplug old and put in new
theres two bolts on top of the lighting housing that you have to remove first. in the back corner of the housing there is a ball and joint that you have to slip out this will remove the housing from the car. on the back of the housing there is three circlular disks that u can twist off which will expose the bulb. repeat these steps in reverse to reinstall.
×