What code p0332 is for my 05 pontiac montana sv6 3.5 engine??

first you need to know engine and transmission faulty code
next it's a default mode when there is a faulty code this is why you need code
hope it helps

shakes and stalls indicates an engine problem-take it to autozone advanced auto or pepboys and have them check your onboard cpu for fault codes-cheers Denny

You have problem with coils and module.One of things is bad and need to replace.Get code reader to check the code.

Code 102 is for a problem with the mass air flow meter circuit.
The sensor is saying the air flow is very low.
Could be the sensor or a leak in the hose between the sensor and the intake.

If the "check engine" or "service engine soon" light is on, then the computer has detected and stored a trouble code ( DTC) and you need an OBD II code reader. the connection should be on the drivers side under the dash on the inside of the vehicle. In some states the local auto parts store will do this for free.

Have a local shop read the codes and have the problem repaired. Just erasing the code will only delay its return.

P1483=engine cooling system performance
Are you adding coolant each time this light comes on in the coolant reservoir?
if so,you need to find where it is leaking out,

Most major Autoparts stores will get the Diagnostic codes from car computer and give you info on why light is on and what the problem is.

You need to get the check engine light codes read. Until then you're just guessing when you replace parts. The engine light is on for a reason, it means there are stored trouble codes. Get those codes read and look them up here - http://www.obd-codes.com

Good luck!

you need to put it on a computer to find what the code is such as on o2 sensor or a number of other things. once you know the codes you can fix the problem