At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I'm not sure which passanger door you're taking about, but i'll assume it's the front passanger door. What I think is happening is that the passanger door's not pushing the Door Switch all the way down when it's close cause the light to stay on.
First check to see if the door switch(to see the switch, open passanger door and it located lower left coner. see picture below) is work by push on. The interior light should go out when push down and on when release.
-If switch is not working, replace door switch.
-if switch is working, adjust passanger door inward by loosing the door striker(A) bolts(B) and tipping it with a hammer. Adjust until door open/close proplery and light stay off when door is close.
this is a new vehicle there is a lock button thats below the controls or above the control make sure its off and not on that can cause this to happen if it is not that then the push button for that window is bad you should be still under warranty take it to dealer if it is that/ Please rate my response thank you very much
Try disconnecting your battery for about 30 sec to reset the ABS computer. You probly have a trouble code stored in the ABS computer and the lights are letting you know there was a problem. If the light stays on after you reset computer then you will have to pull code to troubleshoot problem.
tans. filter is right under the engine on the passanger side. but u dont have to replace it.b'cause its made of steel meche.just flush it.rest talk to the expert.
-If switch is not working, replace door switch.
×