How can I remove fuse box? - 2002 Chevrolet Malibu

The fuse box is located on the driver's side of the instrument panel.
1. Be sure the ignition switch and the headlight
switch are OFF.
2. Pull the fuse box cover to remove1.
3. Remove the fuse with the fuse puller2
look inside removed cover of legend

I removed the top section of the fuse box on a 2007 Buick Terazza Van to get to the bolts to remove the entire box to replace battery; now everything is back together but having difficulty snapping the top of the fuse box to the bottom of the fuse box, is there a technique fo reinstall?

The Fuse box is located behind the glove box. remove the glove box, then remove the fuse box casing.---------------------------------------------------------------------------------------
digiprog 3

there are two 10mm nuts securing the fuse box, remove those and then push the 80amp fuse downwards out of the fuse box (you'll see a clip to the side of the 80amp fuse) once you've slid it out from the bottom of the fuse box you'll see it the wire terminals bolted to the fuse. undo the 10mm nuts and remove. easy as!

theres 3, one under the hood, 2 inside the vehicle ..the interior fuse boxes are on the sides of the dashboard on both drivers and passenger sides. open the doors and look for the removable panels on the dash between the drivers and passengers dashboard.remove the panel....u will see the 2 interior fuse boxes...these 2 interior fuse boxes house the vehicles multiplex control units..

You cannot change the fuse the way that you are trying. You need to loosen all of the bolts that holds the fuse box to the inner fender, and then observe the sides of the box, there are tabs that allow the exterior/bottom of the box to be pulled DOWN. After the box bottom is released, the 120 Amp fuse is accessible.
Hope this helps.

There are two fuse boxes. One is located on the kick panel in front of the passenger side seat. Remove the big cover. Inside there is a second cover that ultimately gets you to the fuses. Try #20 (reference the template on the inside of the cover). There is a second fuse box (high current fuses) inside the engine compartment (on the passenger side of the compartment, big square plastic box). Fuse # 56 (reference the template inside the cover of the fuse box). Same deal.

By the way, there is a fuse removal tool inside the interior fuse box (white plastic piece on the left side of the box). You will need that removal tool to work on the ones in the engine compartment. That other box doesn't have a tool.
Hope this helps.

The fuse is bolted in to the power buss-bar in the fuse box. You have to remove the fuse box center section from the outer section (pull it up) to access the 8 or 10 millimeter bolts that holds it to the buss-bar. No other way to do it.

under the drivers side dash by the door