When you turn on your radio it will ask for code on screen, there should 4 lines for you to put the code on...Good Luck
----------- ---------- ---------- -----------
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It is no good just resetting a warning light, you have to fix the problem. You need a garage to connect a scan tool to it. That gives a code. and then searching the Diagnostic Trouble Code (DTC) P???? code tells the fault and the fix. Most garages will scan for free in the hope of getting the work. It appears to be a known issue.
When you start the car the display should ask you for the code....Code In.....you should be able to simply enter the code and the radio should come back on. If 'Code In' does not display when you turn on the radio press and hold the 'band' button and 'code in' should come up on the screen.....let me know if that helps....if not I will go out and re-do mine on my 1997 Saab 900S to double check.....good luck
I bought a 98 900s and needed code for radio. Looked through the owners manual , and sure enough , previous owner had writen it down on back page. It's worth a look. Good luck.
you shouldnt be able to find it anywhere in the car as this wuld be security risk. usually the code for the stereo is in the manual or you might if it is factory fitted have to ask thwe dealership.
×