SOURCE: can not get gear shift into park
your shifter linkage is mis alligned. could have hit it while 4 bying? anyway, look up the info for this procedure or buy the book on it at the parts store. have a partner sit in the car while you adjust to let you know when it is in place. easy fix
SOURCE: immobilizer
If there is a blinking car icon with an "X" over it. This icon means the Immobilizer has been activated and hence won't allow the car to start. It could be due to a bad SCU, Start Control Unit. The SCU is actually the ignition switch on these cars.
Most of the time it's triggered by the anti-theft system..You can try this trick i learned that the dealers won't tell you...try locking and unlocking of the doors five times with the remote to reset the immobilizer and see if this helps.
Good luck..i hope this helps...please take a minute to rate me a fixya.
SOURCE: cars computer showing immobilizer problem.car will
Dear Sir
It could be cause of 4 things 1 Key faulty 2 Engine Control Module 3 Ignition Immobilizer 4 Wiring.
But when you replacing immobilizer it should be program or paired with Engine Control Module and Key, Then only it will work, for programing you will require scanner or diagnostic tool for particular model, better to visit authorize workshop. if any doubts please feel free and ask me thanks.
107 views
Usually answered in minutes!
×