Any body know what happen for code b2295.which parts should be replaced. vehicle jaguar s type 2005 2.5l petrol vin N44991

Al,

I'm not sure if Jaguar does this, but with other car manufacturers, most electrical /control components are actually tied to the vehicle VIN and won't work on other cars for that reason.....so, yeah, one can no longer just swap parts between cars on some models,.....unless of course the dealer uses their magical SW application that enables the vehicles ECM to recognize that part...not sure if Jag was doing this back in 2000 or not...I know MB & BMW were on their high end cars back then. I would try to borrow and OBDII code reader and see what diagnostic codes come up to try and narrow it down some.

The year, make and model would be nice to know. With what you have posted the only thing that we can tell is that it is a BODY controller error.

Very unlikely - the ''cats'' system was normally fitted to the top range type R or V8's I have never known a 3-0 with it fitted, To double check use your vin number on a spares site or jag dealer to ask what type of replacement shock is recommended. hope this helps

Vehicle is in a restricted performance mode, limits the engine revs to below 3,000. Need to scan the vehicle and see what codes are present. could be a problem with the throttle body.

Simple contact you local Jag dealership and ask them, they will need the VIN No and there is a small charge (about £8). Then follow the instructions on http://www.bluejag.co.uk to enter code.

google search your VIN number

First phone your local jag dealer with your vin number
They should be able to locate your code
If this fails go to www.fitaudio.com
This will show how to remove

Check your OBDII codes.
See http://www.bluejag.co.uk/ for code references

yes all you need is the vin# and proof of ownership and they will give to yu for free.hope this helps

check out with your dealer as you might have a recall to fix this problem.
XT303-S932
X-TYPE
DATE 01/03
MODEL
2002-03 MY
X-TYPE
VIN
C00294-C91719
Overheating - Cooling Fans Inoperative - Replace Module Prior To Retailing - Service Action S932
This Service Action Applies to Vehicles That Have Not Been Retailed
Issue:
The cooling fan module on X-TYPE vehicles may fail under certain circumstances. There are various root causes but the design and quality of the printed circuit board within the cooling fan module are the most significant. The NAND gate used in the circuit is detective causing multiple failure modes, this can result in high engine temperature and overheating due to the cooling fans not operating.
A change has been implemented in production from VIN C91720. On these vehicles a 'Philips' printed circuit board has been used that has a modified voltage spike protection strategy.
Action:
To prevent customers from experiencing this issue, install the latest specification cooling fan module on 2002-03 MY X-TYPE vehicles within the above VIN range that have not been retailed.
PROCEDURE
1. Install new cooling fan module (see Workshop Manual, JTIS CD ROM, section: 303-03, SRO 26.25.38).
Parts Information
Warranty Information:
Warranty claims should be submitted quoting S932 in place of the warranty fault code together with SRO: 26.25.38 and the relevant part number. This will result in a labor time allowance of 0.8 hours to replace the cooling fan module and payment for the part used. Should the vehicle be brought back into the workshop for this action alone to be undertaken, an additional labor time allowance of 0.1 hours can be claimed quoting SRO: 10.10.10 for drive in/drive out.
Warranty claims should be submitted quoting the information found in the table. This will result in payment of the stated time and, where applicable, parts/miscellaneous expense codes.
The options that allow for drive in/drive out may only be claimed when the vehicle has been brought in to the workshop for this action alone to be undertaken.
The SROs and parts items listed above have been included for information only, there will be no requirement to enter the parts or SROs onto the claim.
NOTE: Always perform a DDW claim search first to determine whether this service action has been performed on this vehicle. The warranty selection under the vehicle inquiry will give a listing of all claims against the vehicle. If this service action number appears in the program code field, do not perform this service action.